Ordering Two '06 L7's Tomorrow, Need some advice on ported

ok ive been messing with WinISD but im a n00b to it. Ummm real quick are these the right parameters to my L7's?

parameters.jpg


 
Well are those the paramaters from kickers website? For final reccomendations, make the box as big as possible, at least 6ft each, get at least 125 inches of port area, and when you think youve braced it enough, add twice as much bracing. Tune from 32-36hz. Use a 7/64th drill bit, and 1 5/8 screws. Keep the screws away from corners a little, to reduce the risk of splitting.

 
i apoligize but could someone please double check my parameters I put in? I do not know for sure if they are all right. Thanks A LOT!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Lifelong Pioneer Premier series user here. Switched to the Kenwood eXcelon Reference (XR) DDX9905S and never looked back. Excellent sounding...
9
457
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
361
Very nice to hear you found what you needed to get your audio system/ect. up to your needs. we appreciate the information provided in this thread...
4
397
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
604

About this thread

JakeM

10+ year member
Member
Thread starter
JakeM
Joined
Location
Houston
Start date
Participants
Who Replied
Replies
18
Views
1,217
Last reply date
Last reply from
JakeM
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top