new type Rs!! screeching noise!

i cant seem to find one

i looked on the box, the amp, the book, all i could find what i said before.

coustic amp1200db

heres the specs.

power output: 300watts RMS per channel at 4 ohms

singal to noise ratio:75 dBA

additional power output: 600 rms per channel at 2 ohms

frequency respose: 20 hz to 200hz

max input signal: 5v

max sensitivity: 100mV

 
i cant seem to find onei looked on the box, the amp, the book, all i could find what i said before.

coustic amp1200db

heres the specs.

power output: 300watts RMS per channel at 4 ohms

singal to noise ratio:75 dBA

additional power output: 600 rms per channel at 2 ohms

frequency respose: 20 hz to 200hz

max input signal: 5v

max sensitivity: 100mV
See, it is not a monoblock, its a 2 channel amp.

You wired the subs wrong. The subs can be wired like you have (one sub per channel, subs not wired together), but you have them wired at 8 ohms a piece, so they are seeing something around 100 watts each. You need to wire them into 2 ohm loads each.

see if that helps anything.

 
coustic says it is a monoblock. 600x1 @ 2 ohms. but then they say it isn't bridgeable:confused: i'd say wire them to a single 2 ohms and try it.

Product MPN

MPN 1200db

Key Features

Amplifier Type Mono Channel

Bridgable Not Bridgable

RMS Power at 4 Ohms 300 W x 1

RMS Power at 2 Ohms 600 W x 1

Performance

Frequency Response 20 Hz - 200 Hz

Signal to Noise Ratio 75 dB

THD at Rated RMS Power 1 %

Crossover / Equalizer

Bass Boost With Bass Boost

Bass Boost Frequency 40 Hz

Low - Pass Frequency 40 Hz - 200 Hz

Other Features

Input Voltage 11 volt

3 Way Ready No

Warranty

Warranty 1 Year

Miscellaneous

Product ID 22495975

 
coustic says it is a monoblock. 600x1 @ 2 ohms. but then they say it isn't bridgeable:confused: i'd say wire them to a single 2 ohms and try it.
Product MPN

MPN 1200db

Key Features

Amplifier Type Mono Channel

Bridgable Not Bridgable

RMS Power at 4 Ohms 300 W x 1

RMS Power at 2 Ohms 600 W x 1

Performance

Frequency Response 20 Hz - 200 Hz

Signal to Noise Ratio 75 dB

THD at Rated RMS Power 1 %

Crossover / Equalizer

Bass Boost With Bass Boost

Bass Boost Frequency 40 Hz

Low - Pass Frequency 40 Hz - 200 Hz

Other Features

Input Voltage 11 volt

3 Way Ready No

Warranty

Warranty 1 Year

Miscellaneous

Product ID 22495975

interesting, different than what his box says.

well either way, OP, just so you know, type R's like about 600-800RMS, EACH, so that amp is gonna **** for em either way

 
interesting, different than what his box says.

well either way, OP, just so you know, type R's like about 600-800RMS, EACH, so that amp is gonna **** for em either way
their own website doesn't even have that model anywhere. that is relying on a couple of sites that are selling the "coustic 1200db" amplifier. assuming that is the actual model.

 
is this correct?

2ug028w.jpg


what amp do you recomend?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

xbatxattackx

10+ year member
Member
Thread starter
xbatxattackx
Joined
Location
california
Start date
Participants
Who Replied
Replies
85
Views
4,041
Last reply date
Last reply from
xbatxattackx
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top