Need Info On JL w6v2 Help!

[johnnyvolcom5 10+ year member]

What type of enclosure are they in? That will determine the power needs.
Wire them to 4 ohm and bridge a two channel. It makes no sense to wire to 1 ohm and run the piss out of an inefficient Class A/B.

ok so i measured my box. it measured 30.5w X 16L X 13.5H in. Do i need a different enclosure?

 

[FoxPro5 5,000+ posts]

ok so i measured my box. it measured 30.5w X 16L X 13.5H in. Do i need a different enclosure?

Run it through a box program and see what the internal volume is.

Also, don't buy a 1 ohm stable amp...it's not the right amp choice. This forum is rife with bad ideas, that being one of them.

Tell us your budget and we will help you find a nice two channel that will give you enough power at 4 ohms bridged.

 

[BKIII 10+ year member]

you have a pm

 

[johnnyvolcom5 10+ year member]

ok i got my new amp today....and i need help setting up the filters and the gain and what not......HELP PLEASE....ive never had a subsonic filter on an amp before and i have no idea what im supposed to set the LP filter and bass boost(which i think i should leave as low as it goes) but IDK HELP!!!

 

[southcdogg12345]

I know you can wire a 4 ohm dvc into 1 ohm, te question is if the sub Its made for 4 ohm load, will it handle a 1 ohm load?