Hi-to-Low Convertor with Gain Control

[Kastlez_ 10+ year member]

http://www.xscorpion.com/default.asp?ArtNr=500659

what goes where? hooking this up for my friends install and all i know is that it connects directly to the 6x9's and the amplifier via RCA cable.

 

UPDATE:

 

amp has power but no signal is being sent out to the subs.

 

+ / - spliced into left 6x9

+ / - spliced into right 6x9

 

what could be wrong?

Click to read more...

 

[pentavolvo 10+ year member]

u wire it to ur speaker wires and hook to the amp plain n simple

 

[Kastlez_ 10+ year member]

u wire it to ur speaker wires and hook to the amp plain n simple

In my setup its directly connected to the 6x9s though. I guess i should note that he's running everything off his stock oem stereo

 

[Sudden_Impulse 10+ year member]

Splice into the 6x9 wires either at the rear deck or behind the HU. Run the RCAs to the amp and you're set. If the system has a stock amp for the 6x9s splice the LOC into the system before the amp.

 

[Kastlez_ 10+ year member]

amp has power but no signal is being sent out to the subs.

+ / - spliced into left 6x9

+ / - spliced into right 6x9

what could be wrong?

 

[pentavolvo 10+ year member]

try unplugging one of the rca's and see if u have sound, maybe one side is out of phase

u sure the subs are good and or the amp, also are the rear speakers playing

 

[Kastlez_ 10+ year member]

rear speakers are playing the amp has 12v but there's no signal / volts coming going out when i check the DMM..

confused =/