My Sub went up in flames....literally

DriftGirl
10+ year member

Professional HighSider
56
0
Seattle
i havent posted here in hella...but I know there are people who "know their stuff" on this board. ....

so I just get off the freeway when my subs cut out...I then notice smoke in the rear-view.

Luckily I live close by the exit, so I pull the car into my driveway.

Open the trunk and flames are shooting up from one of my Mayhem Alphasonik 12's...not smoke, this thing was actually on fire.//content.invisioncic.com/y282845/emoticons/rage.gif.0ad8a6e5565b5fddce406566fdd05149.gif To where it scorched the underside of the rear deck in my car.

may1.jpg


Soooooo, Im thinkin I need a re-cone:banghead: anyone know a good place to send it besides Alphasonik*?

Its a pretty good sub....when its not trying to kill me

may2.jpg


EDIT

VIDEO: http://s133.photobucket.com/albums/q49/DriftGirl/?action=view&current=alphasonik.mp4

System setup:

2 Mayhem 900 series 12's

2 ALPHASONIK- PMA1000DA Digital mono block amps (1 for ea sub)

1 ALPHASONIK- PMA2500A CLASS A/B BI-POLAR AMP

2 ALPHASONIK- PCT6551 3-WAY COMPONENT Sets

1 Alphasonik Line Driver

1 Alphasonik C/o

2 Kinetic Batteries for ea sub amp

1 redtop under the hood

wires by Stinger and PG

It is not IB. the subs fire into a box thats ported into the cabin.

* Because they dont answer emails. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Last edited by a moderator:
This is why I don't build subs with stitched in leads or leads sandwiched between spiders.

Recone will cost probably 50$ or so in materials + shipping two ways + someone will probably charge for labor. You may be better off replacing since you're looking at around 150$ and you could probably do better for that money.

 
message SPLaudio on here he can repair any sub and do anything to them he is awesome at his work
will do!! thanks!

Where you been hiding DriftGirl ?
hey!!! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif just work and trying to take care of myself...ill be "back" in a few months //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
will do!! thanks!

hey!!! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif just work and trying to take care of myself...ill be "back" in a few months //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Nothing wrong with that ...don't forget to say hi when you stop by in a couple of months //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
yeah //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

bout an hour, off n on...between phone calls //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Your amp may have failed. A competent shop should be able to diagnose the issue in under 5 minutes either way. You didn't necessarily do...
6
2K
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
203
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
542
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
573

About this thread

DriftGirl

10+ year member
Professional HighSider
Thread starter
DriftGirl
Joined
Location
Seattle
Start date
Participants
Who Replied
Replies
32
Views
3,808
Last reply date
Last reply from
snoopdan
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top