slowfive0
10+ year member
Junior Member
Hey guys,
Great site! I'm a newbie attempting my first box build. Vehicle is a 2000 Chevy Ext. cab pickup. I'm building the box to go under the rear seat to house 2 12's. Here is my problem and question.
I don't know what the subwoofer requirements are? They are 12", Have MD2 on the cone. The sticker on the back of the magnet says:
Impact High Performance Drivers
There is a big M for a symbol?
74792 / MD2128
These are 10 years old if not a little more.
The box I measured up (haven't made it yet) will have approximately 1.25 cu/ft per speaker. I was leaning towards sealed just because of my inexperience and not knowing what the speakers were designed for.
What would you guys recommend for a volume and have you ever heard of these speakers? (I'm not against ported if I can make it work without knowing the speaker requirements.)
Also, should I divide the box up in the middle (separate chamber for each speaker)????
Thank you for any input! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
P.S. I will be powering it up with a Rockford Fosgate amp (200) bridged---roughly same age as speakers.
Great site! I'm a newbie attempting my first box build. Vehicle is a 2000 Chevy Ext. cab pickup. I'm building the box to go under the rear seat to house 2 12's. Here is my problem and question.
I don't know what the subwoofer requirements are? They are 12", Have MD2 on the cone. The sticker on the back of the magnet says:
Impact High Performance Drivers
There is a big M for a symbol?
74792 / MD2128
These are 10 years old if not a little more.
The box I measured up (haven't made it yet) will have approximately 1.25 cu/ft per speaker. I was leaning towards sealed just because of my inexperience and not knowing what the speakers were designed for.
What would you guys recommend for a volume and have you ever heard of these speakers? (I'm not against ported if I can make it work without knowing the speaker requirements.)
Also, should I divide the box up in the middle (separate chamber for each speaker)????
Thank you for any input! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
P.S. I will be powering it up with a Rockford Fosgate amp (200) bridged---roughly same age as speakers.