MM4000.1 1 ohm daily

[terra 5,000+ posts]

ok well that brings this whole question back into asking.

 

[galacticmonkey 5,000+ posts]

You can always try it. You will see the amp stressing before anything happens most likely.

If it isnt what you like, then do something about it. If it happens to work in your case, go for it.

 

[tooloud4tv 10+ year member]

That's why your dropping to the 9's!My shit don't drop below 13 at full tilt.

i only dipped into the 9s when i had the amp running only on the batt for testing this amp is pretty **** efficent! does real good. with my poor *** ele it dont drop under 11. when i wire my subs 2 ohm each channel my voltage barley drops at all!

 

[terra 5,000+ posts]

i only dipped into the 9s when i had the amp running only on the batt for testing this amp is pretty **** efficent! does real good. with my poor *** ele it dont drop under 11. when i wire my subs 2 ohm each channel my voltage barley drops at all!

well at 2 ohm each side you'd be at 4 ohm so you shouldnt be dropping at all lol..

 

[tooloud4tv 10+ year member]

but like i said every install is diff maybe my big *** boxes helps me out with imp rise and all. ive always had BIG boxes in my tahoe 16 cubes plus!

 

[tooloud4tv 10+ year member]

well at 2 ohm each side you'd be at 4 ohm so you shouldnt be dropping at all lol..

idle it drops.2 volts riding it drops none!

Stock alt FTL!

 

[iamamp3pimp 5,000+ posts]

Yeah... People really have a boner nowadays for running amps below their minnimum impedance and at double their RMS.
Dont get it.

blame the 20.1 for that one.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

.08 ohms?

come on now

 

[terra 5,000+ posts]

but like i said every install is diff maybe my big *** boxes helps me out with imp rise and all. ive always had BIG boxes in my tahoe 16 cubes plus!

ya ive got 7.3 cu ft..

 

[tooloud4tv 10+ year member]

only thing u can do is try it and see. its hard to tell from ur install but i know it works in my install and thats with an POS electrical!