Let it begin (Box for 18in BL)

[~Magick_Man~ 10+ year member]

I'm out of school at 3:45, I can shoot up 35 to 635 or however I got to your house last time. Tomorrow is good for me because I dont have to work.
Whats a good meeting point? I dont remember exactly how to get to your house haha

well if you could meet me at my house that would be great.

i wont be getting off work till like 8 or 9 in the morning so i will be asleep till 3ish anyway.

i will pm you my address.

~Magick_Man~

 

[NoLimit 10+ year member]

Cool, I'll jet up that direction, I think I arrived at like 4:10 ish last time? It's not that bad of a drive at all, espescially since I'm right there by 35. Just don't wanna get stuck in traffic, thats no fun //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[~Magick_Man~ 10+ year member]

yeah the 121/635 traffic ***** nuts

~Magick_Man~

 

[NoLimit 10+ year member]

Indeed, sounds good. I'll give ya a ring around 3:50 tmrw.

 

[PSturmer 10+ year member]

i just did an install in my friends bonneville, 15'' L7 facing forward with the port. the box is 7.2 cubes gross and the project turned out good.

 

[~Magick_Man~ 10+ year member]

7.2 seems a little high for a single 15"

and you had both the sub and the port facing into the cabin?

~Magick_Man~

 

[Megalomaniac 5,000+ posts]

if you have a 15" you will only need about 3.5-4 cube box. i have mine(4cubes) sitting in the living room right now that im not using, but i dont know if it will work for you

 

[NoLimit 10+ year member]

Just got an email back from Scott

While I would suggest 8 cuft tuned to 33Hz for the BL18, it still will be louder overall than a BL15 (in 3.5 cuft tuned to 33Hz) if run in 6 cuft tuned to 33Hz. You will have a little more extension on the bottom end, not too mention 2+ dB more overall. Kind of a tossup at that point if space is an issue and you would be happier with the smaller enclosure for the 15.

Otherwise, with 6cuft after prot and driver, tuned to 33Hz, it should work fairly well. It wont be peaky, and have a smoother roll off on the bottom end which would work well with most vehciles transfer functions.

Decisions Decisions Decisions.

 

[Megalomaniac 5,000+ posts]

get the 15 *** //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[NoLimit 10+ year member]

God **** snow, preventing me from driving out to go measure w/ joseph.

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

But god, is 18" ever a big ass woofer.

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif(((((((((((((((((((( I want.

 

[Chevyaudio 5,000+ posts]

Do you want loud....or do you want pretty?

 

[NoLimit 10+ year member]

I definitely don't want plad, LOL.

I want both //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I know a huge box for the 18" won't be fun / pretty at all, that's why im typing up an email to scott now.

This will be enough of an upgrade for me so.

 

[Megalomaniac 5,000+ posts]

the plad is crooked....

so Burberry didnt design it

 

[NoLimit 10+ year member]

15" it is.

New plans.

Sigh, my phones went out //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Megalomaniac 5,000+ posts]

4 cubes tuned to 32hz? what do you think Cliff, joseph?