Just a few questions.

[CrAiZ3 10+ year member]

1. How should I go about wiring my HC2400. I have it as a second battery in the back and have done the big 3 upgrade. Should I buy a battery isolator or run it in paralell with my Walmart battery? I don't plan on letting my system run for long periods of time without the car being started.

2. I am currently on a tight budget. As of now the only amp I have for my door speakers is this:

http://www.carreview.com/mfr/rockford-fosgate/amplifiers/PRD_3893_1806crx.aspx

I have 6 speakers, 2 sets of sony xplod 5 1/4 and a set of JL 5 1/4. How should I go about the wiring for this?

Click to read more...

 

[smoka 10+ year member]

You are adding an extra batt and you don't even have a sub?

But to answer your question yes you will want an isolator or a solenoid to separate the 2 batts.

 

[CrAiZ3 10+ year member]

Yeah, I have subs and and amp. AudioQue HDC18 and planet audio AP3000D. The kinetic will be running the two amps, one for sub and the other for speakers. I figured I would need the isolator. But I still I have no idea how to wire the 6 speakers to that amp.

As for the isolator, what size would I need.

http://www.sonicelectronix.com/item_18720_PAC+PAC-500.html

 

[smoka 10+ year member]

I would think you would want a 300a or larger isolator. That one looks fine.

That Fosgate is a 2 channel so at most you can have 4 speakers on that amp.

 

[armyatc1]

not good to have two diff batteries... it's good to have the same model and have them be the same ages... if not, your crappy walmart battery could put a drain on your kinetik

 

[CrAiZ3 10+ year member]

Which would sound best?

the 4 xplod's running off the amp (The rear speakers)

the 2 JL audio's running off the amp (Front door speakers)

And how should I go about wiring them.