Is thi a 2ohm load

[wildboys 10+ year member]

This is an alpine R dvc sub it is 4ohms.I want my amp to see a 2 ohm load.Is this the correct wiring for 2ohm load or do i have it wired for a 4ohm load thanks.If this is not correct what should i do to make it 2ohm load

Click to read more...

 

[regal8r 5,000+ posts]

wire all positives together and all negatives together and thats a 2ohm load

 

[tapout 5,000+ posts]

http://www.caraudio.com/forum/showthread.php?t=31984

 

[TeoTorriatte 10+ year member]

Page #4, Example #2: http://akamaipix.crutchfield.com/Manuals/500/500SWR1242.PDF

 

[wildboys 10+ year member]

Page #4, Example #2: http://akamaipix.crutchfield.com/Manuals/500/500SWR1242.PDF

TeoTorriatte in the jpg i posted the sub is only wired for 8ohms.If it is a am upset because it was professionally installed and they said it was wired for 2ohm.In the diagram link you posted looks like they wired it for an 8ohm load.Am i correct?It only has 1 jumper the diagram shows two at alpines website.

 

[TeoTorriatte 10+ year member]

TeoTorriatte in the jpg i posted the sub is only wired for 8ohms.If it is a am upset because it was professionally installed and they said it was wired for 2ohm.In the diagram link you posted looks like they wired it for an 8ohm load.Am i correct?

It looks to me as though your sub is wired to 8-ohms.

 

[blackbonnie 5,000+ posts]

http://www.caraudio.com/forum/showthread.php?t=31984

right there is how you do it

 

[tapout 5,000+ posts]

That is correct. You were wired to 8 ohns.

 

[wildboys 10+ year member]

That is correct. You were wired to 8 ohns.

So i just need to add another jumper positive to positive neg to neg right?I think the installer screwed me over.