Identify this TC sub?

Probably a 1000 or perhaps an old style 2000 (they made a few without the tall surrounds).

A severe dent in aluminum cone has the potential to rip open (if you catch it early it can be fixed with JB Weld).

I'd offer 80$ or 100$ with the box if you need the box. Considering new TC1K sold new as low as 180ish, about half price for one used with a f*cked up cone is about what I'd think. Really you can probably get 50$ for the motor and 20$ for the basket so you could go a little higher.

 
I'd offer 80$ or 100$ with the box if you need the box.
the asking price was already a bit lower than this...thanks for the info...what can these handle power wise? and can they be rebulit into something better?

 
IIRC TC1K was "rated" at 600 or 800W probably conservatively.

Specs would change wildly if you rebuilt it since you probably won't find an aluminum cone and TC uses rather soft spiders which may be hard to find. Then again, if it's a 1K it's a standard 12 spoke basket and a motor that'll accept most 4 layer 3" coils so it's a platform you could build off of. Really I think you'd have pretty good results as a good sounding ground pounder running it as-is and just watching that dent for signs of tearing.

 
Sounds like at the price you could smoke it, sell the motor/basket on here and only be out of pocket a few bucks
pretty much..lol...I love smokin subs //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

kr15

5,000+ posts
Polluting Residentials
Thread starter
kr15
Joined
Location
California
Start date
Participants
Who Replied
Replies
6
Views
735
Last reply date
Last reply from
kr15
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top