Frequency for Focal ES165 KX2

[Papermaker85 5,000+ posts]

I used a AC unit. And REW. I don't need a pic. Its the Harmon curve. I'm sure you can google it. I used it with the Bit 1 and it's the base tune for the MS-8.

No video. You LIE

 

[LosIsATool 5,000+ posts]

No video. You LIE

Why would I need to lie about what tune the JBL/HARMON MS-8 does?

 

[ashren315]

The one you started this thread about is a 2 way. If you have a 3 way it's more complicated. 

---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------

 

The Focals are 1in. 1.25 can play lower.

I didn't start this thread.

 

[LosIsATool 5,000+ posts]

I didn't start this thread.

Ah. The big chamber 28mm don't have issues playing 2.5k. The good ones can do 2250 easily.

 

[ashren315]

Ah. The big chamber 28mm don't have issues playing 2.5k. The good ones can do 2250 easily.

Hmm. Interesting. I just never crossed tweets over below 2.8 before and most above 3. Then again, I've always recommended a 3 way set up with 4" or 5.25" for mids and 6.5 to 8" for midbass. Nothing beats a properly tuned and designed 3 way set up IMO. That's not to say some two way set ups can't be good, just always preferred the sound of a good 3 way.

 

[Tony1234]

Thank you everyone for your input.

 

[LosIsATool 5,000+ posts]

Hmm. Interesting. I just never crossed tweets over below 2.8 before and most above 3. Then again, I've always recommended a 3 way set up with 4" or 5.25" for mids and 6.5 to 8" for midbass. Nothing beats a properly tuned and designed 3 way set up IMO. That's not to say some two way set ups can't be good, just always preferred the sound of a good 3 way.

A decent 3 way setup right will normally always win. But they have to be right. I had a solid 3 way in the last car with a killer ZR800 mid bass. TBH I'm just as happy now because I didn't have to modify the car to make it work. Those 8s took a lot of work. But I also had a way bigger sub stage then so it was needed

 

[LosIsATool 5,000+ posts]

Thank you everyone for your input.

Get a RTA and follow the videos I linked. It really is the only way. You are in advanced territory now so you need advanced tools.

 

[Papermaker85 5,000+ posts]

Why would I need to lie about what tune the JBL/HARMON MS-8 does?

You are full of ****. Its that simple.

 

[LosIsATool 5,000+ posts]

You are full of ****. Its that simple.

If you want to stop looking foolish, here. It's all the ms-8 info in one long *** thread.

Enjoy. JBL MS-8 FAQ - Car Audio | DiyMobileAudio.com | Car Stereo Forum

 

[Papermaker85 5,000+ posts]

I used a AC unit. And REW. I don't need a pic. Its the Harmon curve. I'm sure you can google it. I used it with the Bit 1 and it's the base tune for the MS-8.

no proof. you want my RTA curve? you never put up.