First Install: Pictures Included

[iagrdshaka 5,000+ posts]

I understand ideally the frame would be best, but is it really going to make a difference with a 600 watt rms amplifier, one subwoofer, and 4 gauge wire?

I personally doubt it would make that big of a difference.

 

[bibby 5,000+ posts]

bout to say the exact saem thing //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif
oh btw, bibbs...nice avatar:yumyum:

Thanks! thems my hoez lol. but for real.

 

[alboi 10+ year member]

whered you get the d1200 from and for how much?

 

[thejoker989 10+ year member]

The D1200 or formerly known as the 600D was bought from ebay for 180 shipped. Send a pm HCCAFan, he might be able to give you some information on where you can get one.

 

[baker001 10+ year member]

If the car is a unibody,where do you ground(no frame)?

 

[SBLAZER]

easest and i think the best ground would be to run a wire from the neg on the batt up front. and then u would have a solid and strong GND.

 

[helotaxi 5,000+ posts]

easest and i think the best ground would be to run a wire from the neg on the batt up front. and then u would have a solid and strong GND.

It's not neccessarily the easisest, but you are pretty much assured that if your power wire is more than adequate and the ground is the same size as the power, that you will have a low loss ground and a low suceptibility to ground loop problems.