Dodge ram 2500 4x4 build log 2000

lol ,

I havent used any adhesives really ..

But i have a **** load of extra stuff from install that ill be listing FS shortly ..

Just gotta button up the front and then ill sort through what i dont want to keep ,

But i used over 50 ft of 0 gauge .. i was pissed because i had to go to local shop to get a 3 foot length and it was 15+ dollars ! what a rip off .. and it was cheap 1/0 too and actually smaller than the wire i already have .. but it worked out ..

 
ya that looked nice..

But with a little bigger tire ..

Mine will eventually get a lift,

But i gotta pay for the stereo first,

Might get lift over winter vacation next year ..

Have to see ..

but what i have intended is 10 inch +/- on 40''s ..

 
3 inch body lift

5 inch coilover spring topped with a 2 inch spacer ..

then leaves in the rear ..

along with a couple of replacement parts put you at the height needed ..

piece it together and its a lot cheaper ..

hell i can already fit 37's with just a leveling kit ..

i dont think even chevys / gmcs can fit 37's with a 6 inch lift ..

 
well its all buttoned up ..

Need to trim a bit of deadening off the door panels as its squeezed out a bit from under the panel,

sounds amazing

had to do 6x9 to 6.5 conversion out of 1/4 inch MDF,

the rear had to grind out a little bit to get the 6.5 in,

got a few more pictures uploading to photobucket now,

Ill try and get a video made by the end of the day,

But my digital camera doesnt exactly pick up the subs moving too well ..

but ill give it a shot

 
New videos of system guys ..

My camera is just a digital camera so doesnt make a good video camera ..

But i tried to pick up a bit ..

the song is hood ***** ..

the front windshield flexes a WEE little bit ..

the doors flex out fairly well ,

and the rear window shakes and bows in and out like a mofo ..

its noisy too whihc is quite annoying

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I have the CT Sounds 150.4 and two 2000.1. Pretty clean and solid amps for more than a year of use. I wouldnt expect the CT Sounds 80.4 to be any...
10
1K
Amazon has Infinity Reference 9630 Harmon refurbs on sale for $120 bucks. Compared these to several other brands and using an old NVX 2"/SB...
2
971
Hello all of you, unfortuanally as mentioned before it isn’t possible to get fader with this setup: Pioneer radio 4 way output and a factory amp...
26
3K
in advance i already a have a sub skar zvx hooked to a 1500 watt ab mono so take into account there will be a sub may or may not change out the...
1
873

About this thread

Harleyfx69

10+ year member
audio n00b
Thread starter
Harleyfx69
Joined
Location
arizona
Start date
Participants
Who Replied
Replies
37
Views
4,428
Last reply date
Last reply from
Harleyfx69
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top