Dodge ram 2500 4x4 build log 2000

lol ,

I havent used any adhesives really ..

But i have a **** load of extra stuff from install that ill be listing FS shortly ..

Just gotta button up the front and then ill sort through what i dont want to keep ,

But i used over 50 ft of 0 gauge .. i was pissed because i had to go to local shop to get a 3 foot length and it was 15+ dollars ! what a rip off .. and it was cheap 1/0 too and actually smaller than the wire i already have .. but it worked out ..

 
ya that looked nice..

But with a little bigger tire ..

Mine will eventually get a lift,

But i gotta pay for the stereo first,

Might get lift over winter vacation next year ..

Have to see ..

but what i have intended is 10 inch +/- on 40''s ..

 
3 inch body lift

5 inch coilover spring topped with a 2 inch spacer ..

then leaves in the rear ..

along with a couple of replacement parts put you at the height needed ..

piece it together and its a lot cheaper ..

hell i can already fit 37's with just a leveling kit ..

i dont think even chevys / gmcs can fit 37's with a 6 inch lift ..

 
well its all buttoned up ..

Need to trim a bit of deadening off the door panels as its squeezed out a bit from under the panel,

sounds amazing

had to do 6x9 to 6.5 conversion out of 1/4 inch MDF,

the rear had to grind out a little bit to get the 6.5 in,

got a few more pictures uploading to photobucket now,

Ill try and get a video made by the end of the day,

But my digital camera doesnt exactly pick up the subs moving too well ..

but ill give it a shot

 
New videos of system guys ..

My camera is just a digital camera so doesnt make a good video camera ..

But i tried to pick up a bit ..

the song is hood ***** ..

the front windshield flexes a WEE little bit ..

the doors flex out fairly well ,

and the rear window shakes and bows in and out like a mofo ..

its noisy too whihc is quite annoying

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I have the CT Sounds 150.4 and two 2000.1. Pretty clean and solid amps for more than a year of use. I wouldnt expect the CT Sounds 80.4 to be any...
10
1K
Amazon has Infinity Reference 9630 Harmon refurbs on sale for $120 bucks. Compared these to several other brands and using an old NVX 2"/SB...
2
955
Hello all of you, unfortuanally as mentioned before it isn’t possible to get fader with this setup: Pioneer radio 4 way output and a factory amp...
26
3K
in advance i already a have a sub skar zvx hooked to a 1500 watt ab mono so take into account there will be a sub may or may not change out the...
1
857

About this thread

Harleyfx69

10+ year member
audio n00b
Thread starter
Harleyfx69
Joined
Location
arizona
Start date
Participants
Who Replied
Replies
37
Views
4,401
Last reply date
Last reply from
Harleyfx69
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top