crx build complete,, pic;s and vids

[2000LaDe 10+ year member]

i wanna see the back of the tube

im gonna take an off the wall guess and say there is an aeroport at the back side of the tube //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

btw ever heard of a router to cut circles? lol

 

[IbSlamn 10+ year member]

lol

 

[loudaccent 10+ year member]

dont have a rounter,, and there is a areo port in the back but you cant see it its inside the tube,, also its under the window line,, i gave it to all the word finals judges

 

[2000LaDe 10+ year member]

looks to be over windowline. 14.5" tall is at windowline roughly.

 

[lilmaniac2 5,000+ posts]

Im pretty sure that fails the string test ( over the window line )

 

[2000LaDe 10+ year member]

if u get a router and make those rings look better. u could make that install look sweet with some fiberglass/fleece/resin.... //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Corey69 10+ year member]

Im pretty sure that fails the string test ( over the window line )

String test is to see if anything is past the b-pillar. But you should try mounting the amp vertically between the 2 tubes and take the supports out from underneath the tubes if that makes sense.

 

[2000LaDe 10+ year member]

String test is to see if anything is past the b-pillar. But you should try mounting the amp vertically between the 2 tubes and take the supports out from underneath the tubes if that makes sense.

noob? string test is also used to see if the box is above window line.

 

[loudaccent 10+ year member]

i tryed the amp in all possable ways to restrict the lease amount of air flow,, and it is under the window line the 6000 curves down on the sides the tubes are 12, then sitting on skid pads on the amp, ive competed this way alreay.. im getting a diffrent amp in about 2 weeks