Chevette Build.

[nateberrier 10+ year member]

I guess I'm weird because I would love to have one of those lol I actually like the way they look.

Glad Im not the only one. Ive seen one other one around here but its pretty rusted. you can find them in junk yards pretty minty.

 

[thegreatestpenn 5,000+ posts]

ok, a box with an external aero is what we shall do, just let me know what you think the tuning should be. I"m guessing high 50"s for a burpmachine

 

[nateberrier 10+ year member]

ok, a box with an external aero is what we shall do, just let me know what you think the tuning should be. I"m guessing high 50"s for a burpmachine

Fuller was running 57hz I think. Ill double check.

I kind of wanna do two boxes, one tuned for music and the other for burps

 

[thegreatestpenn 5,000+ posts]

well i just drew up one. 1.4cuft tuned to 31Hz. 10x30x14 with 4" aero shooting off the side 22" long

 

[nateberrier 10+ year member]

Sounds good to me man, should get low

 

[connersdad19 10+ year member]

looks good..moar

 

[nateberrier 10+ year member]

Got the doors started with fiber glass. I have about 3 coats of resin over some old shirts for starting. This is my first time doing glass so feel free to flame away.

Moar pics later. Im at work so the ca uploader is all I could use

 

[nateberrier 10+ year member]

Did a 138.5 sealed on the dash and a 141.3 in the kick door open //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif