Build Log: XXX Install and More...

yeah for sure....you got time man. One xxx should be good tho, esp for a sql setup that will look badass

I'm actually looking for 4 3hp motors to test my reconing skills for the future;)...shouldn't have ever sold my old motor

 
Well this morning before I left I went out in the garage to check on the amps. Well, the clear dried out very nicely, and they are sooooooooooo smooooth. Its awesome, I cant wait to get home to put them together.

A couple little pieces of crap got in the clear, just sitting on top, so I took a piece of 2000 grit and rubbed them off. Ill probably just do a full 2000 wet sand on all of them, and then do a little polishing before I put the cases back on.

I cant wait!!!! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Well this morning before I left I went out in the garage to check on the amps. Well, the clear dried out very nicely, and they are sooooooooooo smooooth. Its awesome, I cant wait to get home to put them together.
A couple little pieces of crap got in the clear, just sitting on top, so I took a piece of 2000 grit and rubbed them off. Ill probably just do a full 2000 wet sand on all of them, and then do a little polishing before I put the cases back on.

I cant wait!!!! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
sounds good. what the box specs? didnt see if you already said it.

 
sounds good. what the box specs? didnt see if you already said it.
Still kinda debating, Ill have a little better idea once I finish up the design. I think I had posted 3.25 cube or something. But Im shootin for about 3.5 tuned to 31 with about 50sqin of port. Flared inner wall on the port, and 45's in all the corners, double baffled, with a painted front.

****it!!! I wanna get home already. Im sittin here waitin for my last class //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

My last one ended at 12:15 and Im waitin around till 3:00 sittin here doin nothin //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif I forgot to bring the work I had for another class.

 
yeah mikey u got it go big or go home. lookn great man. love the repaint u did on the basket and amp's look's bad@ss man real nice work so far keep us updated:D.
Thanks man! Will do //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Still kinda debating, Ill have a little better idea once I finish up the design. I think I had posted 3.25 cube or something. But Im shootin for about 3.5 tuned to 31 with about 50sqin of port. Flared inner wall on the port, and 45's in all the corners, double baffled, with a painted front.

****it!!! I wanna get home already. Im sittin here waitin for my last class //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

My last one ended at 12:15 and Im waitin around till 3:00 sittin here doin nothin //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif I forgot to bring the work I had for another class.
i hear ya i had a 2 and half hour break between my class today.

 
i hear ya i had a 2 and half hour break between my class today.
Shit sucks, its like a 45min drive home, so theres no point in leaving, but if I dont have class work to do its almost a waste to be out here.

Still got an hour left in this **** class too, sucks, the profs name is Ahad Ali, as you can imagine hes not extremely easy to interpret //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
Woot!!! Finally got home, and look whats waitin for me //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Alarm001.jpg


Alarm002.jpg


Hells yeah! Gonna be puttin this bad boy in soon, along with a few other goodies. Wont be takin any pics of that stuff though //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Well, did a little wet sanding, about as much as I care to do, and then I started polishing.

I dont have the materials I need to finish them up, so I just did a little polishing to bring the shine back a little for some pics.

Havent put them back together yet, but set the cases on for some pic action.

Gonna get some more polishing gear and get to work on them some more when I get the time. But they look good for now, I havent brought the shine back fully but they will get even brighter the more I rub on them //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

Woot022.jpg


Woot023.jpg


 
Woot012.jpg


Woot013.jpg


Woot014.jpg


Woot015.jpg


Woot016.jpg


Woot017.jpg


Woot018.jpg


Woot019.jpg


Woot020.jpg


OooooooOOOOoooo reflection //content.invisioncic.com/y282845/emoticons/boink.gif.91933e72f927f2cefc79aff02573090c.gif

Cant wait to brighten them up more and put a little coat of wax on them.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

MikeyB

5,000+ posts
CarAudio.com Addict ®
Thread starter
MikeyB
Joined
Location
H-Town, MI
Start date
Participants
Who Replied
Replies
700
Views
71,867
Last reply date
Last reply from
MikeyB
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top