Build log for CobaltKicker; 2.5 @ 35hz

[mlstrass 5,000+ posts]

Looks great! For future reference, I've always used a couple of terry cloth rags to wipe up excess paint on stain jobs. One wet and one dry. The dry one to get the majority of the goo, then a wet one that will get the residue up as you scrub the joint with it. You can always wash the rags before the glue dries to re-use them.

x2 and a putty knife to scrape away the excess before wiping it clean....

 

[Immacomputer 10+ year member]

The tape did a much better job than using damp and dry rags from my past experiences. It wasn't a hassle either so I'm to keep using tape from now on.

Thanks for all the positive comments!

 

[jcbabb 10+ year member]

There is no excess paint when using spray cans...

I meant to type *glue* instead of *paint*.

Fixed it.