I'll wait till the verdict comes in from the jury.eh i dont see that encloser working to well... but hey what do i know... guess we will see
Patience, lots of patience.well ill be ****ed.
how in the hell did you carpet that thing? - it looks amazing
why do you say thateh i dont see that encloser working to well... but hey what do i know... guess we will see
Wayne,why do you say that
its tuned to 35Hz like JL specs say and just a bit bigger on ^3ft than they recomend
i think it was .5 AFTER dis. is that right Phil
thats true im saying itll sound good b/c its designed based off JL spec sheets for the port area which i think is a lilltle larger than JL speced and also .16^3ft larger than specedWayne,
After subwoofer and port displacement, the net volume is EXACTLY . 51 cu.ft.
Listen, I'm not going to get into a pizzin contest with what who says " will or will not sound good " given their basing that opinion " solely " on the design.
Wayne, you'll be the judge and only you, once the subs are in the box and installed in the truck and fire it up and tweak the system settings - then and only then your going to be satisfied or not.
Wayne,thats true im saying itll sound good b/c its designed based off JL spec sheets for the port area which i think is a lilltle larger than JL speced and also .16^3ft larger than speced
if i doesnt sound good it will be of my own fault b/c this is how i wanted the box, i wanted a ported box in a reg cab ranger, with a place for my amp-and thats what it is
is there such a thing as a brek-in period or should i just play normal music at normal levels for a week then go to test tones and bass CDs
Yes, true, there is more to design than " making something fit ", however, your basing your opinion on what you " think " and not on " what ya know ".ok dont get me wrong the craftmen ship of the box is great takes some skills to build a box like that... i just dont think u will get the full potential of those subs with that box design...... there is a lil more to box design then just makeing something fit
How do you determine port area for given design?so how did u come up with the sq of port needed? for that particular design
The port does take into account the xmax, cone to excursion displacement and power = vent mach.actually the port should take reference of the xmax of the driver and VAS of the driver as far as how much power..that would reflect on the size of the box.. and im not a bass head check my thread on diymobileaudio.com