I believe you man.. you give so much advice its time to step up and try one yourself. I actually think you'll get close.
Comon' man... help Op out.
I believe you man.. you give so much advice its time to step up and try one yourself. I actually think you'll get close.
Comon' man... help Op out.
I think the biggest problem I having is that I'm super limited to space...only have 54 inches deep 17 tall and 48 with...I just don't have the space for the 4 I wanted to run...
I dont think the port will be THAT big so do some fabrication. By the looks of that bed you'll get away without a boot too. Id worry about that back window as much as its cutout myself. Maybe reinforce the back cabin wall some?
I dont think the port will be THAT big so do some fabrication. By the looks of that bed you'll get away without a boot too. Id worry about that back window as much as its cutout myself. Maybe reinforce the back cabin wall some?
That's the spirit!My last box was 7 cf per woofer with a slotted port almost blew the front window out...I've always put my woofers in bigger boxes and have never had a problem. Trial and error if it doesn't work I will build a new box...its just my hobby
It's all double walled with 3/4 birch..but I plan on adding moreThat's the spirit!
A single port would have been more efficient than 4 smaller ones, and it looks to me like you will only around 100 square inches of port area which may not be adequate for your cone area.
You will want to add a lot of bracing all around in that box.
You will still want to brace all those large panels and probably one on the baffle between the 4 ports. 1.5" plywood will flex more than you expect when you get into really large panels.It's all double walled with 3/4 birch..but I plan on adding more
Well if shredd wants to design a box I don't mind paying for the time...let me knowIt's all double walled with 3/4 birch..but I plan on adding more
Already on it boss thanks for the advice tho appreciate itYou will still want to brace all those large panels and probably one on the baffle between the 4 ports. 1.5" plywood will flex more than you expect when you get into really large panels.
Thanks@Buck can design it once he gets to feeling better. Shredder2 is no longer doing box designs but buck will for a fee and he doesn't charge much for the kind of work/designs he does. It will come complete with a full set of every cut, angle and what not. He will want the kind of music you listen to, the car/area you have to work with pictures & measurements. But right now he is sick with allergies bad to the point he isn't active right now or doing any designs till this passes hopefully in a couple or few days.
Shredder2 is no longer doing box designs