6th order enclosure build log

[SlugButter]

Parallel tuned 6th order enclosure will house a Savard Hi-Q 10 inch sub. 1.5 cubes at 27 HZ and .6 cubes at 58 HZ. 3 inch aeroports with flares on both ends. Flares I will make myself. On the finish I am going to do a Nebula galaxy with an outer space background using acrylics. The port holes will hopefully look like black holes.

Click to read more...

 

[deez283 10+ year member]

@Ridinhi Sighting!!

 

[SlugButter]

Left a lot of my tools at a house remodel in another state. Pulled out the old home made circle jig. I remember thinking that I should throw it away 10 years ago, but didn’t. Here she is, still ugly and useful.

 

[SlugButter]

Finished up the inside portion of the ports. They also will act as bracing The flare is flared from 3 inches to almost 6 inches. I wanted a big flare to help with port noise.

 

[SlugButter]

Installed the ports. The access door will be the open side. It will fasten to the sides of the port flare/bracing. Still have a little of the frame to put in

.

 

[deez283 10+ year member]

Looking good! What size round over bit do you use for your ports?

 

[SlugButter]

Looking good! What size round over bit do you use for your ports?

1 3/4 inch - 2 inch roundover. Usually I use 1 3/4 for 3 inch ports, but I went with the 2 inch on this one.

 

[SlugButter]

That’s the cut length. The cutting die is 3 1/2. Big sumbich

 

[SlugButter]

Box is built. Sanding and priming up next.

 

[deez283 10+ year member]

That's badazz.. I need to up my router bit game I'm still rockin a 3/4" roundover lol.

 

[SlugButter]

That's badazz.. I need to up my router bit game I'm still rockin a 3/4" roundover lol.

That’s what I use on the outside corners. 3/4 inch is perfect.

 

[SlugButter]

Finished with outer space and the black holes. Now on to adding color.

 

[hispls 5,000+ posts]

That's badazz.. I need to up my router bit game I'm still rockin a 3/4" roundover lol.

Those big ones are very expensive. Hard to justify owning one if you're not using it to make a living.

 

[SlugButter]

Those big ones are very expensive. Hard to justify owning one if you're not using it to make a living.

I think the cheapest one I have was 80$ on Amazon. Most of the routers bought from big box stores won’t accommodate the larger round over bits either. I modified the housing on one of mine so the router bit would fit. The router lasted a few months, but the centrifugal force applied with the large bit burned out the router quite fast.

 

[KicktheSDbasshead]

Finished up the inside portion of the ports. They also will act as bracing The flare is flared from 3 inches to almost 6 inches. I wanted a big flare to help with port noise.
View attachment 52375View attachment 52376

Chingon lmao that's bad ***