150db trunk car Little attempt at big bass

So does the mm4000.1D make the specs of 4000 watts or is that just BS? I havent seen them yet
it can only do 1500-1800 at best with 140amps of fusing i know fuses dont indicate power but there no way in hell your gonna get 4k in that size package for that price

 
amps 1800 @ 14.4

the cuts are straight lol..(that 1 cut im not worried about...)

as far as the sac show everything is looking good..this box should be done by then.

i have to so some electrical beefing up and sound deadening

Whats in the water???

Windshield movement

http://www.youtube.com/watch?v=P_89ew0oGpw

 
amps 1800 @ 14.4 the cuts are straight lol..(that 1 cut im not worried about...)

as far as the sac show everything is looking good..this box should be done by then.

i have to so some electrical beefing up and sound deadening
what class you gonna be running in? will definitely see you there. whats in the car right now? are your wires run inside the car? through the seats?

 
setup is in signature.

wire's ran through car through back seats...

This setup is unique in alot of ways(1 my current box trunk setup which you have not witnessed).

This thing is as loud as my buick with 2 15 cvr's in a prefab ported (trunk)

and its as loud as my buddy's 2 15 cvr's sealed (800 watts) has a arm rest port(i did the install)

far from 2 comps it's built to be loud on the inside...

 
setup is in signature.
wire's ran through car through back seats...

This setup is unique in alot of ways(1 my current box trunk setup which you have not witnessed).

This thing is as loud as my buick with 2 15 cvr's in a prefab ported (trunk)

and its as loud as my buddy's 2 15 cvr's sealed (800 watts) has a arm rest port(i did the install)

far from 2 comps it's built to be loud on the inside...
your not a 150 bro. not that close to it either from what i can see.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I too generally use the factory carpet to make my templates. It's also a good idea to put layer of butyl damping material under the MDF too...
7
801
If the amp is already part of the unit, with the amp built in, you would need a power supply, something like this: Or sell that amp amp and...
2
1K
It will probably change your tuning. I've seen bigger numbers off of much less power from walling at the rear seats, but Terry "trunk king" Brock...
1
1K
Thanks all for your responses! In regards to the dB meter suggestions, I ended up using my Blue Yeti microphone which supposedly can handle up to...
4
1K

About this thread

lilboom

10+ year member
Car stereo for fun
Thread starter
lilboom
Joined
Location
ca
Start date
Participants
Who Replied
Replies
107
Views
18,587
Last reply date
Last reply from
Bettr n' Revrse
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top