Computer building, I am

[Buck 5,000+ posts]

Don't steal my thread!!! jk jk

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

 

[Buck 5,000+ posts]

Forgot this pic right before

 

[Buck 5,000+ posts]

Sleep? What's that?

 

[Buck 5,000+ posts]

On the real though, I'm impressed with the cooler and the application of the paste. It is somewhat apprehension-making, with the way you have to push decently hard on the board to get the lower screw clamp onto the little hook, but I expected that from reading. Went fairly well. Checking for thermal paste leaking around the edges of the CPU, not seeing anything.

 

[Buck 5,000+ posts]

DERRRRRRRRPPPPPPPPP nvm

 

[Buck 5,000+ posts]

*facepalm*

 

[Buck 5,000+ posts]

All good

 

[Buck 5,000+ posts]

Had to order some 4 pin pwm extenders.

 

[Buck 5,000+ posts]

Checking for thermal paste leaking over edge of CPU, looks all good.

 

[2RZ-FE 10+ year member]

My case says 240mm AIO on top under the specs but it hit my ram so I had to install it on the front even though the specs say 280 and 360 on the front. I have a Corsair H100i.
I have five fans two on the front of the radiator blowing in and one on the back of the radiator on the bottom blowing in, one in the rear blowing out and one of the top back blowing out.

 

[Buck 5,000+ posts]

Some time I may get two more 140's and do a push/pull on the front rad

 

[Buck 5,000+ posts]

CabLE MaNAgmeNT grrrrrr. Everything always takes longer than you think

 

[Buck 5,000+ posts]

My case says 240mm AIO on top under the specs but it hit my ram so I had to install it on the front even though the specs say 280 and 360 on the front. I have a Corsair H100i.
I have five fans two on the front of the radiator blowing in and one on the back of the radiator on the bottom blowing in, one in the rear blowing out and one of the top back blowing out.

I just know that heat rises and cold air falls.