WTF!!! Voodoo 1600.1 vs DEI 1500d

[nissanrider06 10+ year member]

and its %80 efficient

 

[Defconx3 10+ year member]

So, you going to go with it? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[iceteebone 5,000+ posts]

and its %80 efficient

i doubt it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[trevor87 5,000+ posts]

id go with it or ask the seller if you could get the amp for say 30 days and try it if you dont like it send it back for the 1500d or your cash.

 

[nissanrider06 10+ year member]

yea im going with it i guess its a european company, but i searched ALOT and found alot of good stuff on it! and for 1660 watts for $200 aint to bad

 

[iagrdshaka 5,000+ posts]

Never heard of Voodoo....

 

[Pyro_By_Nature 5,000+ posts]

I've installed a few of their amps, quite a bit of their wiring and capacitors.From what I have experienced, they're actually pretty decent.I'd take that amp over that directed any day, sadly that isn't saying much //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[nissanrider06 10+ year member]

hey mout whats up with the fusing they dont have any visable on the amplifier from the pics and another guy was saying this as well, do i need to fuse externally like 18 inches before in amp or something? the manual says 150A (external)

 

[Shinobi 10+ year member]

fuse roughly 18 - 24" from ur amp with a 150 amp fuse most high power amps dont have fuses on board. I'm running two batteries so i fuse about 18 " from my battery prolly a lil longer then i run my power wire to my amp .

 

[PhatTonyDeMarco 5,000+ posts]

Have a fuse under the hood, 18-24" from the battery, not the amp...

 

[Shinobi 10+ year member]

Have a fuse under the hood, 18-24" from the battery, not the amp...

Actually whats normally reccomended is 18 - 24 under the hood if you run a single battery and then another 18 - 24 from the amp. This is for amps that require external fusing.