WOT
Banned
Sorry for the catchy title lol, just finished wiring up 4 DVC 4ohm woofers HOPEFULLY down to 2 ohms.
I used this guide
http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=4&woofer_imp=4
So I basically took a positive and a neg on each sub and twisted them together. And then connected all 4 left over positives together, and then all 4 remaining negatives together and running single wire from each to the amp.
Havent fired it yet.
Heres why. When I said I connected a POS and NEG on each sub at the start, I simply grabbed a POS coming form th top of the sub, and a NEG coming from the bottom of the sub to do this. Was hoping it didnt have to be more specific as long as the came from opposite sides of the subs.
Hard to explain. Hope someone can lmk if its ok to use it this way.
Thanks
I used this guide
http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=4&woofer_imp=4
So I basically took a positive and a neg on each sub and twisted them together. And then connected all 4 left over positives together, and then all 4 remaining negatives together and running single wire from each to the amp.
Havent fired it yet.
Heres why. When I said I connected a POS and NEG on each sub at the start, I simply grabbed a POS coming form th top of the sub, and a NEG coming from the bottom of the sub to do this. Was hoping it didnt have to be more specific as long as the came from opposite sides of the subs.
Hard to explain. Hope someone can lmk if its ok to use it this way.
Thanks