Wiring subs

[JayCo13]

So I have 2 -10" dvc kicker subs. Each sub is max peak 800 watts. Rms 400..

I have a kicker amp. Dx monoblock.. 250.1
Now this amp has 4ohms 125w x1 channel or 2 ohms 250w x 2 channels.

I'm "think" I should wire my subs in series... Is this correct or should it be wired parallel? Thanks

Click to read more...

 

[marc2112 10+ year member]

https://www.the12volt.com/caraudio/boxcalcs.asp

 

[JayCo13]

Wow.. Definitely looks EXTREMELY complicated lol but I will watch and try... Thank u very much bc I am very appreciative

 

[marc2112 10+ year member]

Your subs are D2s or D4s?

 

[marc2112 10+ year member]

For D2s..

 

[JayCo13]

Hmmm? Idk... They are cvr10 kickers

 

[JayCo13]

For D2s..
View attachment 19389

So that's series wiring it looks like... Sorry... I'm am completely ignorant to all this... Learning as I go

 

[Petrdragn33]

So that's series wiring it looks like... Sorry... I'm am completely ignorant to all this... Learning as I go

Wire to one ohm if your amp can handle it. Otherwise, wire to 4 ohm. You should probably get a one ohm stable amp.

 

[JayCo13]

Wire to one ohm if your amp can handle it. Otherwise, wire to 4 ohm. You should probably get a one ohm stable amp.

Thank you very very much! I am very appreciative!

 

[marc2112 10+ year member]

No it's parallel. Your subs are D4s. That diagram will work but your amp will not give you full potential of your subs. Your options are (imo):

1. Go with it
2. Trade the subs for D2s
3. Get a bigger amp
4. Get a second kicker amp and use one per sub

 

[marc2112 10+ year member]

Wire to one ohm if your amp can handle it. Otherwise, wire to 4 ohm. You should probably get a one ohm stable amp.

"Best Buy" amps really don't like 1 ohm loads.

 

[JayCo13]

No it's parallel. Your subs are D4s. That diagram will work but your amp will not give you full potential of your subs. Your options are (imo):

1. Go with it
2. Trade the subs for D2s
3. Get a bigger amp
4. Get a second kicker amp and use one per sub

So, in ur opinion, u think I should wire subs parallel and that would work and not harm anything? And yes, soon I will get another amp for each sub. I just don't wanna harm anything. So wiring parallel gives my subs the max they can do. OK thanks.. Man, never thought it was so complicated hahaha.. Tyvm

 

[marc2112 10+ year member]

No!!! The diagram is series. Parallel will give you a 1 ohm load. Sorry for the confusion!

 

[JayCo13]

Haha! No worries! Thanks vm

 

[Petrdragn33]

Sell your amp and buy a Taramps MD1800.1 one ohm version. Adjust the gain correctly and you will be set.