Who here can learn me how to use this?

Polar

CarAudio.com Elite
13103262_10207805300144297_6804215453683929451_n.jpg


13094303_10207805299984293_3276880068630754469_n.jpg


Your assistance is greatly appreciated. Virtual beer on me. Borrowed from a buddy, who doesnt know how to use it so Im lost. Thank you

 
What firmware is on that? what are you trying to achieve, just trying to tun a amp? i have the same one but i have Benf 3.64 on mine (more user friendly to me)

 
I have no clue, how would I find out and yes, trying to tune my amps with it.

 

---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------

 

ver1.5.20.p comes up when I turn it on

 
I have no clue, how would I find out and yes, trying to tune my amps with it. 

---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------

 

ver1.5.20.p comes up when I turn it on
That must be "Pauls Firmware"

Here is the manual if you want to give that a read Seeedstudio Forum • View topic - Firmware 1.5 I flashed mine as soon as i got mine but it had the same firmware on it. I tried tuning with that firmware and could never figure it out. I could help you out on Benf, but i have limited experience with Pauls

 
i used the oem firmware worked just fine, that one looks a little weird for sure

essentially the right hand menus are the options, the top two are the primary options for time and voltage range. once you open a menu you scroll down to the option and use the arrows to adjust the settings. i highly doubt you'll mess anything up, just fiddle with it

 
so clip one lead to +, the other to -. Im assuming VAC is the setting I want to be on. 50 hz test tone for my sub amp. What about my mids and highs amp?

 
I can help.

Move the oscope out of the way and spell this word out- TEACH.

I see in the first pic, the A is missing so that is probably why you are confused. It's to the left of the letter S.

 
If your oscope has the same firmware as the one I have it's not very user friendly. I'll see if I can dig mine up and help you this weekend if you're not in any rush.

 
Yeah....

*teach

//content.invisioncic.com/y282845/emoticons/graduate.gif.d982460be9f153bb54e5d4cb744f6ae8.gif

//content.invisioncic.com/y282845/emoticons/nerd.gif.c6fa51ddf7ff75f1c0371fbc648f70ae.gif

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Aeroport boxes are smaller and lighter. I’m a huge fan of aeroports for more reasons than the lighter and smaller box. They have less surface area...
4
769
The dirtiest hooker allive gotta smell better than fried Epoxy! (okay, that was a tad bit nasty, but funny nonetheless!)
8
1K
Your one stop shop for hair care and mobile electronics? Who could ask for more?
4
1K
Can anyone in here participate in a short interview I am doing for school about the installation of a Kenwood DMX4070S in my 2005 Ford Expedition...
0
1K

About this thread

Polar

CarAudio.com Elite
Thread starter
Polar
Joined
Location
WPB, Florida
Start date
Participants
Who Replied
Replies
14
Views
870
Last reply date
Last reply from
Polar
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top