which box design should i go with?

[acold7dusta 10+ year member]

yea, you'll have about 1.75" of clearance with RE's design, you should be fine. PM me if you want the sketchup of it

edit: just read ur post 2 posts up from me //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[billabongcr 5,000+ posts]

if you have that sketchup ill take it

 

[billabongcr 5,000+ posts]

if i redesign my box with the port in the middle..would that be better?

 

[acold7dusta 10+ year member]

whats ur aim?

 

[acold7dusta 10+ year member]

if i redesign my box with the port in the middle..would that be better?

prolly not, itd prolly take up more space

 

[billabongcr 5,000+ posts]

billabongcr is my aim

**** it..im trying to get my subs to perform in the smallest space possible and i halfway cant figure it out

 

[acold7dusta 10+ year member]

this in internal

 

[billabongcr 5,000+ posts]

yalls autocad skills are crazy. i took half a semester of it and was like**** that

 

[billabongcr 5,000+ posts]

so ill be good with this box?

 

[rpfuror 10+ year member]

Same thing I stated in your last forum, as mentioned above with that volume for air in the port your going to have problems with noise / distortion. It should be somewhere around 3 inch min to get the volume you need with the power your stating.

 

[acold7dusta 10+ year member]

yalls autocad skills are crazy. i took half a semester of it and was like**** that

im still only gettin like a C in that class..i liked autocad inventor much better. solidworks is fun also. but cad does come in handy on my laptop for sure

 

[Pyro_By_Nature 5,000+ posts]

1.5" wide port? LMAO! Might as well seal the box.In that case, the port will probaby hurt you more than anything.All the port is going to do is "SHHHHHHHHHHHHHHHHSHHHHHHHHHHHHSHSHSHHHHHHHHHHHHHHHHHHHSHHHHHHHHSHSHSHHHHHHHHHHH"

 

[billabongcr 5,000+ posts]

and before when people badmouthed you i defended you mountaineer..now you can go **** yourself

 

[billabongcr 5,000+ posts]

ok..im scrapping the whole last idea.

box will pretty much be the same dimensions as last time..but the width will be 11'' and the depth 19

 

[Pyro_By_Nature 5,000+ posts]

and before when people badmouthed you i defended you mountaineer..now you can go **** yourself

That was your choice, yeah I guess you can say I'm grateful.But I am telling you the truth on this box.Could I have worded it nicer? Yes.But seriously, not enough port area.

I'd suggest you look into aeroports.You could get away with 3 4" aeroports.