What i've been up too... Dual Folded horn done by Toxic Bass for Fattony911

[iamamp3pimp 5,000+ posts]

oh yeah, to the thread starter, why didn't you make it two completely seperate enclosures instead of one? they are completely isollated anyway.

I am taking my time on this one, as it is the most compilicated build that i have done so far. I am liking the way that it is coming out so far, and I am also interested in hearing the output from it as well. I am not sure what it will be powered with, but if i am not mistaken, it is for 2 Avalanche 15's/

If i am, fattony, chime in and let me know.

-Robin

More pics coming soon.

Designed by Pete @ Team Toxic bass, as the paper clearly says (well TTB anyway)

 

[PowerNaudio 10+ year member]

this is my 8th wave transmision line enclosure for a 6/5" midbass driver wich i had an EU-700. i got some realy low bass out of this box.

but i like my 15" sub i got for $10 at a garage sale the lows are way louder and hit way better. lol. it pounds.

the length of the line on the 6.5 is 61.75" long. and the sub sits in a .145cuft chamber. the port had to be that long to get the bass that low. i belive it hits the 28Hz at 120db but the mic was crap so the db reading is most likely bull shit. but the 25Hz were pretty strong all the way to like 240Hz. i was impress.

here is a pic.

i realy wonder how low them 15"ers are going to get with such a short horn.

i know its a diffrent design then a tl, but i know they are not that far away in design aspecs.

looking good so far on the build iamamp3pimp.

will you be able to meter this monsters and rta them?

laters

 

[iamamp3pimp 5,000+ posts]

no, i wont.......I dont have that type of equipment., but thanks for the compliment.

 

[JoshHd6 10+ year member]

looking good..

 

[Fattony911 10+ year member]

alright just sent pete an email should be over soon.

 

[vetkilr 10+ year member]

lol

 

[Death By Bass 10+ year member]

lol, my maths suggests, that your 127cm 1/4 wave "horn" means that the full wave would be about 5 meters, which makes it a 70Hz, 1/4 wave horn.... lol

noice!!! //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

is the horn exponential, or conical? conical really do **** if you're trying to get a flat frequency response... ah well... with corners like that, its really not going to do much.

but good luck with it anywya, its a good project...

 

[iamamp3pimp 5,000+ posts]

wow

a compliment from DBB

 

[Pyro_By_Nature 5,000+ posts]

Build a wicked one with a circular saw and do all of the angle cuts freehand and have it come out good //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif you'll see that box ain't shit when it comes to complication. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[Pyro_By_Nature 5,000+ posts]

It looks good, but I have a couple things to say.

Pete is a lousy box designer/business man from what I have seen.I've gone undercover and tried having a box designed by him, overly large for the subs and sounded horrible. Not to mention he gave the same "rear horn" design to at least 6 people telling them it was "specifically designed just for them".

And I can see a couple spots where the cuts aren't the same height, Jordan //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif LMAO //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif I'm just messing with you.It's really hard to make out, but I'll admit I stare at box pics lol. If you are going to be a serious box builder, you NEED a GOOD table saw.

 

[PowerNaudio 10+ year member]

Pete is a lousy box designer/business man from what I have seen.I've gone undercover and tried having a box designed by him, overly large for the subs and sounded horrible. Not to mention he gave the same "rear horn" design to at least 6 people telling them it was "specifically designed just for them".

wow, those are some serious accusations there. but if they are true, thats some shady shit, it funny how some people where calling him a god for knowin his shit. and hes selling the same designs for diffrent subs. i can see it working on some subs that meet the parameters. but for more then a hand full, its very doubt full.

 

[Death By Bass 10+ year member]

lol, well I was saying it was a crap design from the start, now wasn't I...

sheesh!!!

 

[Pyro_By_Nature 5,000+ posts]

Let's see, OFFHAND the SAME "rear horn" design was given out to people with at LEAST 4 different subs.Probably more.Each one was told it was "very specifically designed for their sub and musical tastes".

Get this, on one of them he even put another hole in the SAME box to make it a "double shot".The EXACT same design for a single sub, he just put another hole in and said it was one for two subs.Now watch, a fanboy is going to come in here calling me a liar. I'll have to try and find the threads on sound domain when I get more time.

Get this, he designed a SIMPLE ported box for some guy (nikosbuddy I believe) and the sub just unloaded at all freq.Great designer eh? He also over does the explanation of what you're getting.Makes it sound much more technical and complicated than it really is.I got plenty more from where this came from, but I'm going to go get myself a piece of warm cherry pie and throw some ice cream on top.

 

[iamamp3pimp 5,000+ posts]

While you are eating that cherry pie........clean out your pm box

 

[Pyro_By_Nature 5,000+ posts]

lol, well I was saying it was a crap design from the start, now wasn't I...
sheesh!!!

As much as I don't like you, I have to REALLY agree with you in this thread.

You are probably right, it'll probably just act like a slot ported box of a tuning of god knows what with that port like that.