What i've been up too... Dual Folded horn done by Toxic Bass for Fattony911

[Pyro_By_Nature 5,000+ posts]

Cleaned //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Death By Bass 10+ year member]

As much as I don't like you, I have to REALLY agree with you in this thread.
You are probably right, it'll probably just act like a ported box of a tuning of god knows what with that port like that.

I love you too man!!! //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[Death By Bass 10+ year member]

what were the max box dimensions, and what are the woofers?

I'll try come up with a design that actually suits the woofers, and vehicle...

then, you can make it if you like, and see what a proper enclosure sounds like... //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[iamamp3pimp 5,000+ posts]

what were the max box dimensions, and what are the woofers?
I'll try come up with a design that actually suits the woofers, and vehicle...

then, you can make it if you like, and see what a proper enclosure sounds like... //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

I am pretty familiar with that already, if you werent aware of that, click the links in my sig........

It speaks for itself

-Robin

 

[Pyro_By_Nature 5,000+ posts]

Sonic orange creamslush = pretty good

BTW: Sketchup does take practice //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[iamamp3pimp 5,000+ posts]

I agree.

 

[Death By Bass 10+ year member]

I was talking about designing a horn... not a ported enclosure...

see, this was an SPL enclosure I came up with, but never made...

it has about a 240cm long signal path, making it a 36Hz 1/4 wave horn, compared to the 70Hz one posted at the start of this thread, which was claimed to have a flat response down to 25Hz? lol

anyway, I may make this enclosure oneday, but the car it was for has now been sold... the vehicle peaked at 44Hz, so I needed it to play fairly low... it was designed for two DD9510's... the aim was 150dB at 44Hz.... maybe it would have done it... maybe not...

anyway, enjoy the poorly tuned ported enclosure at the start of this thread. lol

 

[iamamp3pimp 5,000+ posts]

if you wanted to throw out a free horn design, make one for a 5 1/4 Philips HTS Speaker, and ill tell you what i think of it....its in my house

 

[Death By Bass 10+ year member]

the design at the start of this thread... with a few guestimations, and assumptions, I come to a figure of about 55 litres (1.9cuft) per driver, tuned to about 40Hz....

so, please dont get your hopes up at all, cos you may very likely be extremely disapointed...

you want a horn design, for a 5 1/4inch woofer?

if you actually have specs for the woofer, then I'll come up with something.

 

[iamamp3pimp 5,000+ posts]

the design at the start of this thread... with a few guestimations, and assumptions, I come to a figure of about 55 litres (1.9cuft) per driver, tuned to about 40Hz....
so, please dont get your hopes up at all, cos you may very likely be extremely disapointed...

you want a horn design, for a 5 1/4inch woofer?

if you actually have specs for the woofer, then I'll come up with something.

that has already been established by you, which based on your credibility doesnt really say anything at all. beyond that, i dont have any specs on it......just think of your average cheap *** HTS speaker, that is 3 ohms, and accepts about 60 watts before catching on fire.

 

[Death By Bass 10+ year member]

that has already been established by you, which based on your credibility doesnt really say anything at all. beyond that, i dont have any specs on it......just think of your average cheap *** HTS speaker, that is 3 ohms, and accepts about 60 watts before catching on fire.

1. I have no idea what you're talking about

and

2. I'm not designing a horn for a woofer with unknown specs.

 

[Pyro_By_Nature 5,000+ posts]

You want some credibility? Or something to kill time. . . . . Design a horn to peak at 46-47hz for a 6.5" tangband at PE (you know the one I'm talking about), or a ED 6.5. I will thrown it on a TL eventually and post the results with a vid. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif In fact I'd put one of my experimental boxes against it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif because I don't have anything better to do lol.

Specs. for either aren't too hard to get.

 

[Death By Bass 10+ year member]

You want some credibility? Or something to kill time. . . . . Design a horn to peak at 46-47hz for a 6.5" tangband at PE (you know the one I'm talking about), or a ED 6.5. I will thrown it on a TL eventually and post the results with a vid. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif In fact I'd put one of my experimental boxes against it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif because I don't have anything better to do lol.
Specs. for either aren't too hard to get.

what car though? cos horns only work properly in vans, station wagons, SUV's etc...

they dont work at all in hatch backs, or sedans...

 

[Pyro_By_Nature 5,000+ posts]

I don't "do" sedans.

SUV //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[bdawson72 5,000+ posts]

do they work in pickup trucks?