viper setting help w/ pics

[g8tor 10+ year member]

hey guys i got my two 4ohm 12 alpine type-r's wire down to 1 ohm on my viper 1200d amp. well im not really sure what all these settings are on the amp. i was wondering if someone out there could give me a helping hand on how to set these. also the gain tutorial link is down, so im not really sure how to set the gain.

THANKS

http://i42.photobucket.com/albums/e330/gwinn4698/vip.jpg

Click to read more...

 

[zachzchw 5,000+ posts]

Should find a great deal of help on http://www.bcae1.com

and

http://forums.caraudio.com/vb/showthread.php?t=63933

 

[Daher2323 10+ year member]

i'd recommend setting the lpf around 60-80 hz, bass eq at 0, subsonic filter at 1/4 octave below your enclosure tuning....and the rest depends on the rest of your system //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[nissanrider06 10+ year member]

lpf you could defininately get by a litte higher thnan 80hz and for subsonic you want to multiply box tuning by .75

 

[JAZN 5,000+ posts]

Here's the new link for the gain setting tutorial

http://mobile.jlaudio.com/support_pages.php?page_id=143

You don't really need to turn on the subsonic filter if you have a sealed or low-tuned box. LPF is going to be dependent on how low your front speakers can play, I wouldn't go any higher than 80hz.

 

[g8tor 10+ year member]

thanks guys