Twistedchild420's 21" build log(I'm not building sh!t though!)

[twistedchild420 5,000+ posts]

Pretty sure in the end he will be using the full power of the amp. ( 3k+) He just has it like this for now until it is all finished.

That

 

[twistedchild420 5,000+ posts]

muthafuccin innovative *** niqqa

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[jbizzle 5,000+ posts]

And the award for retard of the week goes to............

SUB2WEEKER

 

[twistedchild420 5,000+ posts]

And the award for retard of the week goes to............










































SUB2WEEKER

DING,DING,DING//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[Twisted_0912 10+ year member]

but its a 21" the cone size determines power handling right //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[WrenchGuy 10+ year member]

3000 is about all I'd do with these. I've read some pretty informative stuff on em and the 1 review I took seriously had these at 3000 daily.

The debate seems to be the cone to coil size I guess. The "coil rock" from the size and over excursion were also discussed.

I'm starting at the high side of 10 cubes per. I plan on RMS values but as displacements come in I may lean towards the 3k each also. Thats if my budget allows it.

Just keep tweekin Twisted and let me know what you come up with. I'd like to know everything you notice about these as you go.

Thanks and keep it up!

 

[twistedchild420 5,000+ posts]

3000 is about all I'd do with these. I've read some pretty informative stuff on em and the 1 review I took seriously had these at 3000 daily.
The debate seems to be the cone to coil size I guess. The "coil rock" from the size and over excursion were also discussed.

I'm starting at the high side of 10 cubes per. I plan on RMS values but as displacements come in I may lean towards the 3k each also. Thats if my budget allows it.

Just keep tweekin Twisted and let me know what you come up with. I'd like to know everything you notice about these as you go.

Thanks and keep it up!

Thanks man...tomorrow gonna get some bracing done...and then maybe drop er to .5 ,set gains modestly ....and after impedance rise i should be looking @3K......where did you do your research at....link?

 

[twistedchild420 5,000+ posts]

but its a 21" the cone size determines power handling right //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Exactly!//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[DoucheMODS 10+ year member]

And the award for retard of the year goes to............










































SUB2WEEKER

fixed //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[WrenchGuy 10+ year member]

Thanks man...tomorrow gonna get some bracing done...and then maybe drop er to .5 ,set gains modestly ....and after impedance rise i should be looking @3K......where did you do your research at....link?

I'll find.

 

[sub-FATHER 10+ year member]

And the award for retard of the week goes to............









































SUB2WEEKER

thank you, thank you... and for my next trick...

 

[Blue Collar 10+ year member]

thank you, thank you... and for my next trick...

let me guess....sandpaper to face?

 

[twistedchild420 5,000+ posts]

Ok....got my game plan for this week....Sunday gonna pull box out....brace it with threaded rods(with help of course) drop down to .5ohm......and we are Termlabbing that bish! Unfortunately the beauty panel won't be done by then....FTL

 

[infamous_e46 5,000+ posts]

http://www.caraudio.com/forum/showthread.php?t=444543

 

[twistedchild420 5,000+ posts]

Well since i won this from the good peeps @ ROE....this is now in the build log! Numbers coming sunday! Sadly not yet sealed //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif