Twistedchild420's 21" build log(I'm not building sh!t though!)

[Annnarbor84 5,000+ posts]

Get you some gorilla tape and seal that bish

 

[KyleBechtold 5,000+ posts]

Can that box go back any further? If not you should probably switch the port side as I am sure that being THAT close the port noise will get ya.. if it doesn't cool.. but also to help prolong your hearing as being in the port the entire time would make daily not fun..

 

[twistedchild420 5,000+ posts]

Can that box go back any further? If not you should probably switch the port side as I am sure that being THAT close the port noise will get ya.. if it doesn't cool.. but also to help prolong your hearing as being in the port the entire time would make daily not fun..

Surprisingly there isn't any port noise....i am worried about it throwing the sound off though....by the port not breathing properly....gonna get a better box built down the line...port on top!

 

[twistedchild420 5,000+ posts]

Get you some gorilla tape and seal that bish

i might do that specifically for the meter run....good idea!//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[Annnarbor84 5,000+ posts]

i might do that specifically for the meter run....good idea!//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

Yep does not have to be permanent

 

[twistedchild420 5,000+ posts]

Yep does not have to be permanent

Think duct tape will work?//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[Annnarbor84 5,000+ posts]

Think duct tape will work?//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Yep should work just fine

 

[boostNbeer]

Ya gorilla tape works great on areas that arent HUGE 6+" gaps

 

[twistedchild420 5,000+ posts]

Man....we got that bish braced and wired to .5 yesterday...but we didn't get finished in time to term lab.....it handled 3800 pretty well....just not at high volumes on burps...started to bottom out.. i account this to all the airspace.....we braced with 1/2 inch threaded rod....and we did manage to get one sweep in on half volume ...but that's where we left off..things still too unstable ...got me a 141.8 @ 34 htz.....should have the beauty panel built this weekend...then testing will resume!

 

[twistedchild420 5,000+ posts]

Update! We found a big problem today....when we put the box back in it accidentally knocked the ground cable completely loose...causing big voltage drops(the amp is gone now) and that sent out a dirty bad signal ... thus causing the sub to bottom out! I'm gonna get on top of it tommorow and fix it....Send my RD amp out and install the Kicker! And then record some new vids with my super sweet new cam! Built in 16 GB memory FTW!!!!!!!

 

[basscort2009 5,000+ posts]

Update! We found a big problem today....when we put the box back in it accidentally knocked the ground cable completely loose...causing big voltage drops(the amp is gone now) and that sent out a dirty bad signal ... thus causing the sub to bottom out! I'm gonna get on top of it tommorow and fix it....Send my RD amp out and install the Kicker! And then record some new vids with my super sweet new cam! Built in 16 GB memory FTW!!!!!!!

AAHHHH double check your work before jammin! sorry to hear that man. sucks big time //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[boostNbeer]

A loose or crappy ground would cause voltage drops???

 

[joe14 10+ year member]

**** man that sucks man.....hope u get it right back up before turkey drag..

 

[Brian_smith06 10+ year member]

//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[twistedchild420 5,000+ posts]

AAHHHH double check your work before jammin! sorry to hear that man. sucks big time //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Thanks man...gonna get that shit fixed and be careful from now on!//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif