Thors 09 Build Log

Still waiting to get meter fixed. aaarrrgghhh!

It's gonna be around 45+ outside today so I may get some resin on the box. It sounds friggin awesome until I get to the point of too much box flex. LOL Then It sounds like I'm ripping the darn thing apart.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
Thanks for the positive feedback fellas!

More pics. The box is gonna work just fine just need to tune it. couldn't stand the box flex and noise so I pulled it out and gave it a good layer of Resin. I will add more tomorrow.

HPIM1493.jpg


HPIM1495.jpg


HPIM1496.jpg


HPIM1497.jpg


HPIM1498.jpg


HPIM1499.jpg


HPIM1500.jpg


 
This isnt going to get loud at all...
//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif
Nope!//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif It's gonna be ludicris loud!//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
It rattles pretty hard but I have a pretty good seal job once complete. It doesnt flex too much unless I break a seal then It just becomes retarded.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

My trunk lid itself probably is about 40 pounds or so. Its pretty solid. Lots and Lots of foam and dynamat. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
hey rob i was wondering are you judgeing the april 5th show?,,I was wondering if i could make a run with the pr's to get an official 150 with them but use my 12 vengeance subs for the comp.

 
well okay,i'm just wondering about the flexing because my trunk is flexing crazy, like an inch... but i didn't seal teh 2 6X9 holes nor the stock subwoofer hole in my rear deck. Guess i should get to that too this weekend :)

 
hey rob i was wondering are you judgeing the april 5th show?,,I was wondering if i could make a run with the pr's to get an official 150 with them but use my 12 vengeance subs for the comp.
That should be no prob! We will also be running a 1xDbdrag as well.

well okay,i'm just wondering about the flexing because my trunk is flexing crazy, like an inch... but i didn't seal teh 2 6X9 holes nor the stock subwoofer hole in my rear deck. Guess i should get to that too this weekend :)
You def. need to seal that rear deck. If not it defeats the purpose of sealing it to the cabin. You don't want any air to get back in the trunk.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
^^Thanks

I have gotten the batt into the spare tire well and dynamatted the rest of the trunk. Just gotta wait for the box to cure and it will be back in. Hoping to get testing soon.

Pics will be up later

 
Floors back

HPIM1506.jpg


They wanna go for a drive

HPIM1507.jpg


Amps at rest:laugh:

HPIM1508.jpg


I also got the box back in with the subs. Will get more pics in am when I rewire this beast!//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 
First port length peaked at 38hz!//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif 147.8 //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thorshammer1

10+ year member
CarAudio.com Veteran
Thread starter
thorshammer1
Joined
Location
Auburn, NY
Start date
Participants
Who Replied
Replies
1,488
Views
120,154
Last reply date
Last reply from
uGotF-ckedUp
561786595_18427607485102160_7010259965928918509_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0
561583216_18427455586102160_8141545757991593433_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0

New threads

Top