-
5Participant count
-
Participant list
SlugButter
CarAudio.com VIP
Those would work fine. On the little stereo I just did I have 25 watts going to 2 coaxials paired with the tang band sub at 50 watts and I had to turn the gain down on the speakers. My speakers are crossed over at 150 HZ HPF though, which lets them play much louder than if I had them playing down to 80 HZ.
Activity
No one is currently typing a reply...
Similar threads
The correct answer is yes, you want both left and right so you get low end information from both channels. It is very common for recording...
- Started by AudioArchitech
- Wiring, Electrical & Installation
only one way to find out. thanks for the input.
- Started by RMDecker
- Wiring, Electrical & Installation
The preamp input on most amps is 10-20k ohms, so you don't really lose voltage. I've run plenty of systems off 2v preamps with no problems.
- Started by toddington
- General Car Audio
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 16
- Views
- 2,508
- Last reply date
- Last reply from
- SlugButter
