***SQ log for camry 01*** rambos project

[Beat_Dominator 5,000+ posts]

Looming looks fine to me... just keep the wires as clear of sharp edges as you can.

 

[Slammed 5,000+ posts]

Nice work latino

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[netherland24 5,000+ posts]

i hope i do good in this SQ thing... also if i use primary wire does that have to be away from signal wire?

 

[james33440 10+ year member]

nice.

are you going to get it tuned with a RTA?

 

[JimJ 5,000+ posts]

How many layers of deadener do you have? More is always useful //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

You're going to have to build out the speaker baffle with something, but that looks like a good start.

Also, how did you cover those large open holes? Just putting deadener over them? A better way, if you could fit the pieces in, would be to take 1/8" Lexan panels and cut them to fit...I did something like this for the large holes in my door, CA'ing them to the metal and then deadening over that. Remember, you're trying to make your entire door a giant sealed enclosure, and it needs to be as airtight and acoustically dead as you can get it.

I agree with getting on an RTA if you can, going to be hell to adjust the H701 without it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif And you'll pwn MECA RTA if you choose to...

 

[Johnny Drama 5,000+ posts]

How many layers of deadener do you have? More is always useful //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
You're going to have to build out the speaker baffle with something, but that looks like a good start.

Also, how did you cover those large open holes? Just putting deadener over them? A better way, if you could fit the pieces in, would be to take 1/8" Lexan panels and cut them to fit...I did something like this for the large holes in my door, CA'ing them to the metal and then deadening over that. Remember, you're trying to make your entire door a giant sealed enclosure, and it needs to be as airtight and acoustically dead as you can get it.

I agree with getting on an RTA if you can, going to be hell to adjust the H701 without it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif And you'll pwn MECA RTA if you choose to...

Last time I talked to him he was doing his doors like mine...deadener, liquid, then rattle pad. No need for plexi, works fabously.

I have the RTA when he is ready //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

No Meca in Texas //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Dj-torn 10+ year member]

That looks really nice, keep up the good work. Are you running an active or passive setup, cuz it look active to me?

 

[netherland24 5,000+ posts]

well i hope i can PWN anything just local would make me HAPPY //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif **** so much more work still ahead of me. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif time to fiberglass... **** i will miss the superbowl for it too.. got my bushing' s for firewall and my heatshrink tubing thanks VIPER118 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[netherland24 5,000+ posts]

Last time I talked to him he was doing his doors like mine...deadener, liquid, then rattle pad. No need for plexi, works fabously.
I have the RTA when he is ready //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

No Meca in Texas //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

thank You //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif i will to get it right. i wont use liquid just yet will try with out but i will use rattle pad. i have 3 in hte inner layer.. and 2 on the outer layer of the door.

 

[netherland24 5,000+ posts]

ok NEW PICS UP //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[netherland24 5,000+ posts]

 

[netherland24 5,000+ posts]

NO LUMPS !!!!!!!!!!!!!

 

[alphakenny1 10+ year member]

looks good man! i forgot but is your frontstage? i think you got some mb amps and an h701 right? should be fun tuning. that h701 is an amazing piece of equipment.

 

[netherland24 5,000+ posts]

yup gona runn a RAA1000 for a IDMAX 12, and RAA4200 for the 2 pairs of MB Quart Q's with a H700 but a H701controller and a D300 screen //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[alphakenny1 10+ year member]

awesome man. lots of money put into that, put it to work!