speaker cutout help

[69420potsmoker 10+ year member]

Can someone figure out how to make me a couple cutouts I can print to actual size. I need one perfect circle with a diameter of 12.625 and another with 11.125.

Has anyone ever done anything like this and with what program? Photoshop?

Click to read more...

 

[Immacomputer 10+ year member]

Use a compass and draw it on the wood. That's the best and most precise way to do it. If you're slightly off, erase and try again.

What do you plan on cutting them with?

 

[69420potsmoker 10+ year member]

I just thought it would be easier if I could print out a cut out like I did when making my midbass baffles. And I don't have a compass but If they have cheap ones somewhere Id go pick one up.

And ill be using a jigsaw

 

[Trixter 10+ year member]

you can rig something up out of a piece of 1/4" hardboard (cardboard could work too). drill a hole for a piviot point and measure from there. drill holes at your measurements and use this one for the pencil.

 

[oglejust 10+ year member]

^^^^^^^^^^^ thats what i do //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Immacomputer 10+ year member]

I just thought it would be easier if I could print out a cut out like I did when making my midbass baffles. And I don't have a compass but If they have cheap ones somewhere Id go pick one up.
And ill be using a jigsaw

Make a compass; you don't have to buy one. A good way to make one was mentioned above.