Hello! I am new to the world of car audio! And I just want to ask if the following setup is wise/works at all without damaging anything! Be kind, as I may have jumped the gun with excitement and bought the wrong peripherals. But wanted to see if you guys think this will be fine to set up or a big no-no.
HU: Already exists in the car (Toyota GT86/FRS/BRZ) Sony XAV-AX1000
https://www.crutchfield.com/p_158XAV1000/Sony-XAV-AX1000.html
___________
Amp 1: Pioneer 1000w GM-A6704 - 4-channel 60 watts RMS x 4
https://www.crutchfield.com/p_130GMA6704/Pioneer-GM-A6704.html
Speakers Front (Doors): Memphis Audio PRX602 Power Reference Series 6-1/2" 2-way car speakers 50 watts RMS (100 watts peak power)
https://www.crutchfield.com/p_953PRX602/Memphis-Audio-PRX602.html
Speakers Rear: Memphis Audio PRX4 Power Reference Series 4" 2-way car speakers 20 watts RMS (40 watts peak power)
https://www.crutchfield.com/p_953PRX4/Memphis-Audio-PRX4.html
____________
Amp 2 (Sub): Pioneer GM-A3702 2-channel car amplifier - 60 watts RMS x 2 at 4 ohms (95 watts RMS x 2 at 2 ohms)
190 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
https://www.crutchfield.com/p_130GMA3702/Pioneer-GM-A3702.html
Subwoofer: Kicker 48TCWRT672 - 2 ohm 150 watts RMS (300 watts peak power)
https://www.crutchfield.com/p_20648TT672/Kicker-48TCWRT672.html
____________
I've highlighted the power ratings. My worry is that the amps are too powerful for the speakers. I've done some maths (I think) and I could be overpowering my speakers.
Advice would be much appreciated.
Thanks and I hope you're all doing well!
J.
HU: Already exists in the car (Toyota GT86/FRS/BRZ) Sony XAV-AX1000
https://www.crutchfield.com/p_158XAV1000/Sony-XAV-AX1000.html
___________
Amp 1: Pioneer 1000w GM-A6704 - 4-channel 60 watts RMS x 4
https://www.crutchfield.com/p_130GMA6704/Pioneer-GM-A6704.html
Speakers Front (Doors): Memphis Audio PRX602 Power Reference Series 6-1/2" 2-way car speakers 50 watts RMS (100 watts peak power)
https://www.crutchfield.com/p_953PRX602/Memphis-Audio-PRX602.html
Speakers Rear: Memphis Audio PRX4 Power Reference Series 4" 2-way car speakers 20 watts RMS (40 watts peak power)
https://www.crutchfield.com/p_953PRX4/Memphis-Audio-PRX4.html
____________
Amp 2 (Sub): Pioneer GM-A3702 2-channel car amplifier - 60 watts RMS x 2 at 4 ohms (95 watts RMS x 2 at 2 ohms)
190 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
https://www.crutchfield.com/p_130GMA3702/Pioneer-GM-A3702.html
Subwoofer: Kicker 48TCWRT672 - 2 ohm 150 watts RMS (300 watts peak power)
https://www.crutchfield.com/p_20648TT672/Kicker-48TCWRT672.html
____________
I've highlighted the power ratings. My worry is that the amps are too powerful for the speakers. I've done some maths (I think) and I could be overpowering my speakers.
Advice would be much appreciated.
Thanks and I hope you're all doing well!
J.