Hey guys I have a Soundqubed HDC3.118 and need some help building a box for it. It will be ran off of a FSD Audio 2600 but I plan on only pulling 2000watts @ 1-Ohm from it. I've seen recommendations all over the place for box size, tuning, port area, etc. which is pretty discouraging for me so I built it with pretty modest specs, I think. The box is being built for daily listening/music.
Heres what I have so for:
6.01 Cubic Foot Box (Net)
30.1 Hz Tuning
8" Aero Port (Flares to 12")
8.36 Square Inches Port Area per Cube
Are these good specs for a HDC318? This is my first time designing and building my own box. Any insight you can give is appreciated.
Also I'm going to double baffle but should I sit the subwoofer on top of both baffles or leave one so it's flush around the speaker?
Heres what I have so for:
6.01 Cubic Foot Box (Net)
30.1 Hz Tuning
8" Aero Port (Flares to 12")
8.36 Square Inches Port Area per Cube
Are these good specs for a HDC318? This is my first time designing and building my own box. Any insight you can give is appreciated.
Also I'm going to double baffle but should I sit the subwoofer on top of both baffles or leave one so it's flush around the speaker?