Reply to thread

Message

<blockquote data-quote="Kyle13130" data-source="post: 8482027" data-attributes="member: 669190">Hey guys I have a Soundqubed HDC3.118 and need some help building a box for it.&nbsp; It will be ran off of a FSD Audio 2600 but I plan on only pulling 2000watts @ 1-Ohm from it.&nbsp; I&#039;ve seen recommendations all over the place for box size, tuning, port area, etc. which is pretty discouraging for me so I built it with pretty modest specs, I think.&nbsp; The box is being built for daily listening/music.Heres what I have so for:6.01 Cubic Foot Box (Net)30.1 Hz Tuning8&quot; Aero Port (Flares to 12&quot;)8.36 Square Inches Port Area per CubeAre these good specs for a HDC318?&nbsp; This is my first time designing and building my own box.&nbsp; Any insight you can give is appreciated.Also I&#039;m going to double baffle but should I sit the subwoofer on top of both baffles or leave one so it&#039;s flush around the speaker?</blockquote>

[QUOTE="Kyle13130, post: 8482027, member: 669190"] Hey guys I have a Soundqubed HDC3.118 and need some help building a box for it. It will be ran off of a FSD Audio 2600 but I plan on only pulling 2000watts @ 1-Ohm from it. I've seen recommendations all over the place for box size, tuning, port area, etc. which is pretty discouraging for me so I built it with pretty modest specs, I think. The box is being built for daily listening/music. Heres what I have so for: 6.01 Cubic Foot Box (Net) 30.1 Hz Tuning 8" Aero Port (Flares to 12") 8.36 Square Inches Port Area per Cube Are these good specs for a HDC318? This is my first time designing and building my own box. Any insight you can give is appreciated. Also I'm going to double baffle but should I sit the subwoofer on top of both baffles or leave one so it's flush around the speaker? [/QUOTE]

Verification