Setting the filters on my amp

[sk8erboyla2004 10+ year member]

Alright just some basic info i got 15" Cerwin Vega VMAX DVC 2 and a kenwood excelon kac-x812 D I listen to rap mostly

Well my amp has 3 filters a Low Pass Filter, Infrasonic Filter, and a Band Reject Filter and i have no clue how to set the these

Low Pass Filter can be adjusted from 50 hz to 200 hz and has a slope 24 db per octave

Infrasonic Filter can be set from 15 hz to 20 hz and db slope

Band Reject Filter can be adjusted from 40hz to 200 hz and has a BRF switch of -6 db of -12 db

any suggestions thanks

Click to read more...

 

[sk8erboyla2004 10+ year member]

Anyone?

 

[crow 10+ year member]

For the lowpass filter, start off at 80hz. Listen to the system and fine tune the adjustment to blend with your mids and high speakers. Generally, the setting should be from 60hz to 100hz.

The infrasonic filter is used if you are running a ported enclosure to keep the lowest frequencies from possibly damaging the sub. If you have a ported enclosure, 20hz should be fine. If you have a sealed enclosure, the filter is really not necessary.

I've never heard of a band reject filter so I can't help much there.

Hope this helps.

 

[sk8erboyla2004 10+ year member]

Thanks man aprrecate

any others with exp. with these kind of filters