srch4aresn 10+ year member
Senior VIP Member
alpine 9887
sundown 1500d
dc lvl 4
have the sub wired to 1 ohm, playing 50hz test tone on the stereo, volume at ~18 since i rarely go past that. i should get a ac measure of 38.7
upgrade battery cables from innovative wiring (similar to big 3, all 0-2 gauge copper wires) and 1/0 gauge for the amp.
even with the gain maxed out (no bass boost) im only getting a reading of 10.5 ac. should i turn the volume up or start turning up the bass boost or what? im going to go disconnect the mids/high amp and see if i can turn it louder to get the targeted volt reading
sundown 1500d
dc lvl 4
have the sub wired to 1 ohm, playing 50hz test tone on the stereo, volume at ~18 since i rarely go past that. i should get a ac measure of 38.7
upgrade battery cables from innovative wiring (similar to big 3, all 0-2 gauge copper wires) and 1/0 gauge for the amp.
even with the gain maxed out (no bass boost) im only getting a reading of 10.5 ac. should i turn the volume up or start turning up the bass boost or what? im going to go disconnect the mids/high amp and see if i can turn it louder to get the targeted volt reading