Rockville 12D1 Destroyer

No,. Keep in mind, having the 1/0 in place just allows you to breath going forward. It affords you an upgrade path going forward. If you are considering improving the build incrementally then yes, definitely go the larger 1/0 OFC right off the bat.

The big three will help should you get a 2nd battery and have to run more equipment (it's not a bad idea at any rate). If your considering doing it all at once, then may want to buy your stock and connectors separately. these guys have pretty decent pricing on all colors/gauges of about any wire you can think of.

 
thank you for the information! would it make sense to get a rockville amp to go with the sub? would the rockville rxm s6 or db16 8k watt be sufficient?
No don’t get a Rockville amp, i smoked the 8000 watt back and blue one and I smoked a 6000 watt krypton. In the process of getting a Taramps 3000HD, the same one that was recommended to you, it makes 4100 watts rms on the dyno and has cooling fans
 
Hello guy it has been a while since my last post but i wanted to give you guys an update. I went with the taramps 2k amp and a 2 gauge amp wiring kit from Skar. I also replaced my rear door speakers with pioneer. This is the set up:
  • amp

  • wiring kit
  • rear door speakers (pioneer 3 way, coaxiel)

I have been running this setup for over a year now. I liking it a lot but i been thinking about replaciong my front door speakers and also get the big 3 wiring kit.

-For the front door speakers do i go with the same set as the rears or do ya recommend a different one? what is a good big 3 wiring kit to get?

Thanks in advance.
 
Last edited:
What size are the front speakers?
How are you going to power the fronts and the rears?
What's the budget?
the fronts are 6x9 as well. I only replaced the rears with the pioneers, same placement as factory. Should i have them powered a different way?
I spent 70$ on the rears, I was planning on spending the around same amount on the front as well.
 
I think that the front is much more important than the rear.

First off, you need to install an amplifier for the front and rear speakers.

If you can swing it, right now there isn't a better buy out there than this little guy. $119.00 and worth every penny!




You absolutely need this for the fronts and the rear speakers.

If you can get that, then I'd plan on getting something a little better sounding for the front speakers (the primary stage in your vehicle), in either a two- or four-ohm, two if you can find them.

Something that won't break the bank an it's 3-ohms:


It will draw slightly more power from the amp, and it's a lot more efficient, so even on the same power, it will be about 4-5db (additional power draw from the amp plus 4db more efficient than the Pioneers).

Adding just those two things will make a night-and-day difference in your setup, night and day.
 
Last edited:
ok cool i was looking into those speakers but i was not sure entirely. i did not even know i need an amp just for my speakers. i will be doing for research on that for sure. with that being said I would need to do the big 3 wiring upgrade?
 
Activity
No one is currently typing a reply...

About this thread

Scooby59

CarAudio.com Newbie
Thread starter
Scooby59
Joined
Location
New Jersey
Start date
Participants
Who Replied
Replies
42
Views
5,182
Last reply date
Last reply from
Doxquzme
20260903_221224.jpg

Giles

    Sep 4, 2026
  • 0
  • 0
20260903_221030.jpg

Giles

    Sep 4, 2026
  • 0
  • 0

New threads

Top