Ridn's Expo Build Log

I would have been there if I knew were it was //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Lakewood was pretty broad!

 
Looks good ridin......
I am sure you could work on those numbers though. I am at 145 in a trunked car off about 1700rms. It has to have more in it off 3k.
the meter is a tad off as u can see.

but my peak is somewhere in the 45-50Hz range.

i finally got the right tones so i got some testing to do.

if you guys know some tracks in that range feel free to post em up!

ill have a TL next week sometime for more testing.

 
lol im sorry //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif
vids up in a bit from noph33r.

setup is nice!

I know bro'hem, you know I gotta give you hell a little bit //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif My pulse did jump up to about 140 when I read your text though...

Setup sounds great man! Are you running that RD at 2 ohms? There's gotta be higher numbers in there, especially with some deadening.

 
yeah man i was hopin to hear your setup.
thanks!

we gotta meet up soon
Haha, my setup would be total weakness compared to your guy's //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
I know bro'hem, you know I gotta give you hell a little bit //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif My pulse did jump up to about 140 when I read your text though...
Setup sounds great man! Are you running that RD at 2 ohms? There's gotta be higher numbers in there, especially with some deadening.
LOL. i bet it jumped.

yeah at 2ohms for now.

i feel i can run 4k to em, but this is good enough, dont wanna break em in too much since ill have another pair of fresh ones.

yeah i need to order some SS again

Haha, my setup would be total weakness compared to your guy's //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

eh, i doubt it.

 
you just need to get that 18'' MT back in there
You know what....

You're RIGHT //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

You guys lit the loud spark in me again //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Howie, any chance we can have a TL meet this weekend?

I think I'm only free Saturday however...

 
what a massive tweet this is....

100_0901.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K
https://www.youtube.com/@therealmatty_s/videos
0
632
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
985
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
1K

About this thread

RidnClean

5,000+ posts
Love 4 Money
Thread starter
RidnClean
Joined
Location
Washington
Start date
Participants
Who Replied
Replies
286
Views
17,498
Last reply date
Last reply from
RidnClean
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top