Revolution Design Audio, Everyone Cmon In...

Status
Not open for further replies.
although i agree with you.. teh w7 doesnt sound very good either.. for sq i would go with the w6 (out of the jl line up at least)//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I do agree with you the w7 is not a sq sub and i would agree the w6 spanks it in this category, however i think at least my w7 sounds 10x better than the rd or Fi's i heard and they were not that much louder if they were

 
Try again. atomic=sja:)

Man you beat me to it, I wanted to rain on his parade //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

SJA is RD's build house. The fact that they use a different backplate/spider design is irrelevant

Atomic is SJA's house brand.

If you look at packaging, old back plates, construction, parts used you will see the similarities.

Fact is that RD uses SJA as a build house is kinda irrelevant. Everyone has to get there subs built somewhere, so why not there? even if it were a rebadged atomic sub ( which it isn't, although the same guy who glues together atomic subs probably glued together the RD sub ) I would much rather deal with the pushy sales tactics of RD than the blatant lies that George Woo ( Owner of SJA ) and his wife spit out every chance they get //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Man you beat me to it, I wanted to rain on his parade //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
SJA is RD's build house. The fact that they use a different backplate/spider design is irrelevant

Atomic is SJA's house brand.

If you look at packaging, old back plates, construction, parts used you will see the similarities.

Fact is that RD uses SJA as a build house is kinda irrelevant. Everyone has to get there subs built somewhere, so why not there? even if it were a rebadged atomic sub ( which it isn't, although the same guy who glues together atomic subs probably glued together the RD sub ) I would much rather deal with the pushy sales tactics of RD than the blatant lies that George Woo ( Owner of SJA ) and his wife spit out every chance they get //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I just realized that I was in your sig

 
Man you beat me to it, I wanted to rain on his parade //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
SJA is RD's build house. The fact that they use a different backplate/spider design is irrelevant

Atomic is SJA's house brand.

If you look at packaging, old back plates, construction, parts used you will see the similarities.

Fact is that RD uses SJA as a build house is kinda irrelevant. Everyone has to get there subs built somewhere, so why not there? even if it were a rebadged atomic sub ( which it isn't, although the same guy who glues together atomic subs probably glued together the RD sub ) I would much rather deal with the pushy sales tactics of RD than the blatant lies that George Woo ( Owner of SJA ) and his wife spit out every chance they get //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I agree on that one.. finally, something we agree on:laugh: although it SEEMS rd has had its share of lies as well...

I just realized that I was in your sig
hey, me too!//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Pardon me for being a dumb arse old fart . But why would someone considering MT's and BTL's be concerned with the sound quality of an spl sub ? I bet sound quality was the low man on the totem poll when both were on the drawing board. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Pardon me for being a dumb arse old fart . But why would someone considering MT's and BTL's be concerned with the sound quality of an spl sub ? I bet sound quality was the low man on the totem poll when both were on the drawing board. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Pardon me for being a dumb arse old fart . But why would someone considering MT's and BTL's be concerned with the sound quality of an spl sub ? I bet sound quality was the low man on the totem poll when both were on the drawing board. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Pardon me for being a dumb arse old fart . But why would someone considering MT's and BTL's be concerned with the sound quality of an spl sub ? I bet sound quality was the low man on the totem poll when both were on the drawing board. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Ok...turns out you were correct on their amps...zenon did build the boards for sundown...Sundown gets their amps from the same build house RD gets theirs from, 1 of their amps happen to share the same board, but it was never stolen because Sundown never came up with the design in the first place, it was just a board design that zenon came up with...i'm not afraid to admit when im wrong
But Atomic does NOT build the RD drivers

The thread http://forum.realmofexcursion.com/showthread.php?t=22899

and another

The thread http://audioforum.termpro.com/cgi-bin/ubb/ultimatebb.cgi?/topic/40/23148.html

wow Atomic builds all of RD's drivers, thats why im going to Atomic to photograph all of RD's subs for their website and catalog. :/

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

About this thread

MisterGrubbs

5,000+ posts
Kinda Old School
Thread starter
MisterGrubbs
Joined
Location
Newnan, Georgia
Start date
Participants
Who Replied
Replies
109
Views
5,156
Last reply date
Last reply from
denim
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top