Re-Thinking New System - What to do?

[robb01 10+ year member]

So I basically upgraded all my current speakers without putting a whole lot of thought into it, now I'd like to re-do it, heres what I'm thinking...

Current setup consists of:

3.5" Coax in Dash - - > run off head unit

6.5" Coax in Front / Rear Doors - - > run off 75 x 4 rms amp

I have the balance all the way to the front, so the rear coax's really aren't doing anything. I'm thinking of ditching those, and getting a nice quality component set and having the 6.5" in the front door and the tweeters in the dash where the 3.5s are now.

This way I can also bridge my amp for 150 w x 2.

Does this make sense, or should I leave it as is?

Click to read more...

 

[Sonic. 10+ year member]

6.5 components in the front (amped), you can can keep the coax in the rear run off hu power.

 

[robb01 10+ year member]

6.5 components in the front (amped), you can can keep the coax in the rear run off hu power.

Thanks, I'm not too certain how to wire this on the amp. Bridge each channel and then run the bridged to the crossover for the components? So the front right component set is on one channel and the left on the other?

 

[Sonic. 10+ year member]

Thanks, I'm not too certain how to wire this on the amp. Bridge each channel and then run the bridged to the crossover for the components? So the front right component set is on one channel and the left on the other?

Yep, you got it.

 

[TreyE 10+ year member]

Whats the budget on components?

 

[robb01 10+ year member]

Whats the budget on components?

~150-200