Problem! Box I got from Vitveet

[bassman3 10+ year member]

Just amazing.

 

[Annnarbor84 5,000+ posts]

*UPDATE*Now the front panel of the box sperated from the bottom of the box.. this is so pathethic

It had been suggested that go through the box and brace it up. Apparently you did not do that.........

 

[LazyRider 10+ year member]

Should have taken those free screws he offered. That would have fixed everything //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[MrSplorDie 10+ year member]

It had been suggested that go through the box and brace it up. Apparently you did not do that.........

I've made plenty of boxes and I have never seen a panel come apart because of bracing... When inspected it was an obvious lack of wood glue, and the front panel come apart where the side panel is, if flexxing cause anything it would of caused the panel to separate more towards the middle of the box where there is more flex.. I don't even care about this POS **** box or Vitveet crappy build... Lesson learned don't buy from him, horrible work and horrible customer service, I plan on going back to the basics and build my next box myself at a friends house

 

[RAM_Designs 5,000+ posts]

I plan on going back to the basics and build my next box myself at a friends house

This is definitely the way to go if you've done boxes before...saves money, and you have no one to blame but yourself if something goes wrong.

 

[MrSplorDie 10+ year member]

This is definitely the way to go if you've done boxes before...saves money, and you have no one to blame but yourself if something goes wrong.

Yea defently, I have Tite Bond II and plenty of screws, I never carpeted my boxes but this local shop does it for like $30

 

[RAM_Designs 5,000+ posts]

Yea defently, I have Tite Bond II and plenty of screws, I never carpeted my boxes but this local shop does it for like $30

Brah, clear you PM's...I haz design for you.