Post your home audio setups. Here is mine.

I take that back, I thought you were talking about rebooting. Powering completly off and then back on I have never had to do. I have only had to reboot mine from time to time.
Must just be a luck of the draw or something. Cause I had a bad box and they replaced it and I haven't had any problems with mine in quite sometime.

I do have a question though. Can someone explain to me why 2 out of 4 of my HD movie channels get all distorted like when a fast action scene happens? Happens on one showtime and 1 HBO HD channel, but not on the others or any other HD tier I have. Find that strange. Could that be something with the box? Cause it don't do it on my Sony, just my Westinghouse, but all the other channels are fine. So I doubt it would be the TV. Any ideas?
Either bad compression by the station or bad decompression by the set.

 
This house is a full Crestron system, 110 inch screen with 2 32 inch LCDs, Yamaha projector, Krell speaker, Krell DVD player and Receiver.

2209387722_5aa624e8a2.jpg


2261193243_d0113cd6a8.jpg


This System has The Klipsch THX Ultra 2 speakers, 110 inch screen with a yamaha projector, Yamaha RXV1800, Xbox 360 and a DVD player. Room has Auralex acoustic panels

The Rack

2262868102_99e563247b.jpg


The Room

2262868104_f7e6eb0e19.jpg


2262868108_f4e58a90f1.jpg


 
I am thinking this guy is a professional installer...


TJones said:
well i work of a custom home theater company and just wanted to share some of the work i have done.
Before

http://farm3.static.flickr.com/2361/2261193233_be36f2c44a_m.jpg

One of the Racks at about 90% finished

2261193243_d0113cd6a8_m.jpg


After

http://farm3.static.flickr.com/2044/2209387722_5aa624e8a2_m.jpg

I will post more photos tomorrow of other projects.


//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Please excuse the messy room and the crappy vid quality. I had to convert it from AVI to MPG since the file was over 100 MB. Anyhow, here is the vid. Pay attention to the papers on the desk....oh yeah, stupid card ran out of memory space so the video got cut short //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif.



 
that sub looks familiar, does it have a big *** dent like mine? And why you still got a pix of your ex (maybe)?
Is it loud though?
Tis your ex-driver..and teh lady, well we got back together the next day after things cooled down.

As for it being loud, not as loud as I thought. But that might be the enclosure, the way I'm facing it (currently corner loaded), and maybe even power. It's taking the full 1k without any problems at all and seems like it could want more...then again I don't know the capabilities. Did you hook it up when you had it? If so, how'd it sound, how much power, and what kinda enclosure was it in?

dont those lms drivers have huge magnets?
might want to get that away from your pc before it fucks the hard drive
Ya, pretty big. Four 3/4" slugs...how would it mess up the hard drive? I also have fiberglass insulation inside the enclosure and its a good 3 ft from my pc. I used to have an 18" TC 5200 in there and had it for a few good months...I haven't noticed anything different.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bigbangtheory

5,000+ posts
CarAudio.com Veteran
Thread starter
bigbangtheory
Joined
Location
Venus or Mars, just depends.
Start date
Participants
Who Replied
Replies
1,144
Views
221,146
Last reply date
Last reply from
Jeffdachef
IMG_0710.png

michigan born

    May 14, 2026
  • 0
  • 0
IMG_0709.png

michigan born

    May 14, 2026
  • 0
  • 0

New threads

Top