dakota5.9
Junior Member
Hello, I have had this head unit for 10+ years and in that time I have replaced the flex ribbon cable that goes to the base of the face plate at least 3 times, easy replacement every time as it had the small circuit board already attached.
Well now the ribbon that goes to the main screen needs replacement. I got the replacement ribbon but because the head unit is still in my truck and it works fine but I cannot make any adjustments I am a little weary of pulling it out if I can not install ribbon cable I will have to reinstall it without any subs/sound adjustments.
Anyone that replaced this ribbon, can you tell me if there is soldering involved and is it doable by a person with very limited experience soldering?
Well now the ribbon that goes to the main screen needs replacement. I got the replacement ribbon but because the head unit is still in my truck and it works fine but I cannot make any adjustments I am a little weary of pulling it out if I can not install ribbon cable I will have to reinstall it without any subs/sound adjustments.
Anyone that replaced this ribbon, can you tell me if there is soldering involved and is it doable by a person with very limited experience soldering?